Bleib
Major Contributor
- Joined
- May 13, 2021
- Messages
- 1,789
- Likes
- 3,191
Well, TRS is still an option obviously? I doubt many will pay about ~900 USD for PEQ function through D90 III discrete
Last edited:
-
WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!
1 bit DAC launched by TOPPING
- Thread starter 192kbps
- Start date
There are definitely trs out, you can see it on pcb on certification site, link was at one of previous pages
here we go all thanks to @Dimka100
tells us all the models are the same (so the manual labeled TPC20C is valid).
The manual lists
* USB, OPT, COAX, BT in,
* TRS (i assume balanced) & RCA out
* 12v trigger
* the ability to set up 2 user presets (volume, input, filters?)
external photos shows the above to be correct. The BT antenna is 3 or 4 times the size of the one on my D50s
internal photos show the pcb and chips.
tells us all the models are the same (so the manual labeled TPC20C is valid).
The manual lists
* USB, OPT, COAX, BT in,
* TRS (i assume balanced) & RCA out
* 12v trigger
* the ability to set up 2 user presets (volume, input, filters?)
external photos shows the above to be correct. The BT antenna is 3 or 4 times the size of the one on my D50s
internal photos show the pcb and chips.
Bleib
Major Contributor
- Joined
- May 13, 2021
- Messages
- 1,789
- Likes
- 3,191
The manual says BAL so obviously balanced out. It also mentions BT remote. Nice.
Negative seems to be OLED screen which never fully turns off, as it shows the current input and time out is 30 seconds for the rest of the screen off. I'd rather be able to change it to 5 seconds and fully off screen.
Last edited:
I'm not really seeing anything that hints at PEQ being built in either, not in any of the documentation or in the chips having the processing power to do it.
We will probably have to wait for the D70 Pro Sabre replacement (I assume later this year or early next year) for XLR out and built in PEQ. Would be nice if it has HDMI eARC, and a good enough controller and display to go with it.
Not shure what model I listened to back then, but it must have been one their first MASH models.
Bleib
Major Contributor
- Joined
- May 13, 2021
- Messages
- 1,789
- Likes
- 3,191
I think you're right, surely it would be included in the manual if it was included
If the hardware was there, I could see it being a firmware update down the road, but I don't see what i would consider to be enough processing power.
here is the mcu.
- Thread Starter
- #110
I am sure.
D50 III has a fully balanced design and supports 10-band PEQ.
Yes, the user manuals, and FCC certification enclosures/documentation indicates TRS outputs. Nowhere in the user manual (or from internal photos) is there any indication of, or facilities for DSP. D90 III, different story.
I'm more than satisfied 3 years on with my $750/used (AK4490) RME ADI-2 DAC FS
Are you beware of any plans to add peq functionality to older products?
I think 6 channels means balanced stereo (4ch) + single ended stereo (2 ch)That or aimed at people with 6 ears
Yes I have seen those before, with lots of knobs. This seems more like for people with many headphones as you point out. Doesn't seem practical to have to go through push button selection to change the volume and end up blowing your buddy's ears.
Maybe with different EQ settings for each output?
Pearljam5000
Master Contributor
- Joined
- Oct 12, 2020
- Messages
- 5,613
- Likes
- 6,012
How does it compare to this 1 bit DAC?
Your funny
It cost >2 times more than the complete KEF LS60 +dual KC92 I just ordered .
Lol i was watching this particular photo when my wife came into the room.
She said exactly the same
- Thread Starter
- #118
I haven't gotten word on this yet, but even if there is an upgrade, it will only be for the XMOS 316 series, I'm guessing.
Yes, but multi level.
Similar threads
