AsciLab

https://claude.ai/public/artifacts/29d85f2c-3208-41e4-95e4-cce6d2005aea Updated. You can add the absorbers now with parameters. The...

These are for about 15 Kg weight, maximum. I believe they are plastic? You probably mean something similar up to the task.

https://claude.ai/public/artifacts/e3e24dc5-67cd-436d-be64-ebc9b250ecf6 And the simulator is updated. 1. Save and Load feature is...

Following feedback from many people, we have lowered the height by 10 cm. The resulting change in internal volume has been verified as...

AsciLab Directivity & Room Response — Beta Now Open Directivity · Boundary Interference · Room Mode Simulator We're releasing a web...

I tend to agree that as it stands the C8T feels a touch too big (especially for Europe), but was curious on how it would look purely on...

Still too heavy. Mounting from back plate isn’t a good idea.

We’ll consider that advice. Let me find any way to optimize acoustic performance between good looking ratio. Thank you so much!

If we make the height lower we should encrease the depth to keep internal volume. Isn't it more disadvantage for small room? I'm just...

Tweeter height (acoustic center) including outrigger is 107cm from the floor. It won't be too high for listening height sitting on sofa...

And the ports are mounted at downward. You can put the speaker right front to the wall.

Its size is WHD : 220x1300x350mm (without outrigger)

About 45Hz I guess but still have to be measured with physical prototype.

And for the C8T, We are re-designing the C8T as dual 5" driver, MTM placement. It makes the vertical dispersion more controlled and...

. . . or make them self-leveling like the wheel caps on a Bentley/Rolls!