Ascilab C6B & F6B Launched – Ask Questions, Share Feedback

[AsciLab]

Ascilab C6B and F6B have been launched! Feel free to ask any questions, share feedback, or join the discussion.

C6B
Measurement data

F6B & F6Bs
F6B Measurement data
F6Bs Measurement data


You can check out the product development process in the following thread:
ASR Ascilab Speakers Thread


To purchase, please visit:
www.ascilab.com

 

[Uncola]

My C6B shipped! Very excited to hear a waveguide speaker like these. I’ll try them for my desk setup first, then other rooms

 

[JohnnyNG]

Love 7-Up!

 

[phoenixdogfan]

I see there is a $200 shipping fee to the USA for the C6b's, would shipping fees for the A6b's be the same, and, most importantly what will the tariffs and import duties amount to, or are they already included in the price?

BTW, congratulations on getting everything off the ground. I know I've been critical of you in the past, but I just wanted to see your brand realize its enormous potential.

So congratulations, I'm sure Asci will be a great High End brand.

 

[Salt]

Needs some more listed local dealers, as Keith is first and only so long

 

[AsciLab]

I see there is a $200 shipping fee to the USA for the C6b's, would shipping fees for the A6b's be the same, and, most importantly what will the tariffs and import duties amount to, or are they already included in the price?

Originally, under the Korea-U.S. Free Trade Agreement (FTA), Korean-made speaker products were subject to a 0% tariff in the United States. However, since the Trump administration, this situation has been continuously changing, so it's most accurate to check the current status locally in the U.S.

The prices listed on ascilab.com do not include shipping fees, customs duties, or import taxes.

 

[AsciLab]

Needs some more listed local dealers, as Keith is first and only so long

We are currently in discussions regarding dealership opportunities with several countries. We will do our best to establish official dealers in each country.

 

[phoenixdogfan]

Originally, under the Korea-U.S. Free Trade Agreement (FTA), Korean-made speaker products were subject to a 0% tariff in the United States. However, since the Trump administration, this situation has been continuously changing, so it's most accurate to check the current status locally in the U.S.

The prices listed on ascilab.com do not include shipping fees, customs duties, or import taxes.

I just querried Chat GPT and it indicates that for imports from South Korea there are no US tariffs on loudspeakers mounted in stand alone enclosures, but urges that any potential buyer querry US Customs and Border Protection to verify that. Certainly good news if true for potential US customers. Obviously state and local sales and use taxes and customs' fees would still apply in any case.

 

[Uncola]

mine seems to be stuck in customs
"Clearance delay - Import A statement is required from the consignee unless the consignee authorizes the shipper to complete and include the toxic substance statement on their behalf."

 

[AsciLab]

mine seems to be stuck in customs
"Clearance delay - Import A statement is required from the consignee unless the consignee authorizes the shipper to complete and include the toxic substance statement on their behalf."

We apologize for the delay in customs clearance. We submitted the TSCA documents via FedEx last Friday. Once U.S. Customs reviews the documents, the customs clearance process will proceed without any issues. If any other issues arise, please contact us directly at [email protected] at any time.

 

[Uncola]

Just arrived! I have to leave for work right now but tonight I'll set them up. My expectations are so high for these speakers

 

[Purité Audio]

Excellent news, I have mine set with about a 15 degree toe in, ( I can’t see the insides of the enclosures from my seat) but you must of course experiment.
Keith

 

[Uncola]

Unboxing experience was great. The foam pieces that hold the speakers in place and protect them feel up to the task and smartly designed.

Reserved for more details
These speakers look great and are nicely finished, no problems there
the only issue I ran into will likely not be a problem for anyone else. I was going to use the speakers upside down to get the tweeter to my ear level, since I have speakers on stands above my computer monitor, but the presence of the passive radiator meant my speaker cable would hang down the back of the speaker, laying on top of the passive radiator. that seems like a bad idea so I'm using them with the tweeter on top
Tip for removing the trim rings so you can install the grills. I almost broke a fingernail trying to get the trim rings out. Too lazy to look for a plastic pry-tool I bought years ago from ifixit. I ended up being able to pull the trim rings out using the combination of a plastic credit card and my fingernail
I have a minidsp flex with dirac live going to a purifi 7040 high current class d amplifier. reran dirac, enjoying the new speakers a lot(it's been less than an hour so kind of early to say more)

 

[Purité Audio]

They look smart particularly with the grills.
Keith

 

[AsciLab]

Unboxing experience was great. The foam pieces that hold the speakers in place and protect them feel up to the task and smartly designed.

Reserved for more details
These speakers look great and are nicely finished, no problems there
the only issue I ran into will likely not be a problem for anyone else. I was going to use the speakers upside down to get the tweeter to my ear level, since I have speakers on stands above my computer monitor, but the presence of the passive radiator meant my speaker cable would hang down the back of the speaker, laying on top of the passive radiator. that seems like a bad idea so I'm using them with the tweeter on top
Tip for removing the trim rings so you can install the grills. I almost broke a fingernail trying to get the trim rings out. Too lazy to look for a plastic pry-tool I bought years ago from ifixit. I ended up being able to pull the trim rings out using the combination of a plastic credit card and my fingernail
I have a minidsp flex with dirac live going to a purifi 7040 high current class d amplifier. reran dirac, enjoying the new speakers a lot(it's been less than an hour so kind of early to say more)
View attachment 454095
View attachment 454096
View attachment 454097
View attachment 454098
View attachment 454099View attachment 454100View attachment 454101View attachment 454102View attachment 454103

Thanks for detail images. Looks awesome!
Our 2way bookshelf has wide vertical dispersion at crossover point. If you listen at midwoofer height, that won’t really make an issue. For your information, the acoustic center is between tweeter and woofer.

 

[Periffery]

Can anyone tell me which white is the white listed on the site? I don’t like the more yellow one, but it’s not clear. Have the A6b launched yet? Or just out of stock? I am really eyeing these, but it’s a little unclear what’s what sometimes.

 

[AsciLab]

Can anyone tell me which white is the white listed on the site? I don’t like the more yellow one, but it’s not clear. Have the A6b launched yet? Or just out of stock? I am really eyeing these, but it’s a little unclear what’s what sometimes.

Our A6B is not launched yet. We are still waiting for the drivers. You can choose “Matt White” the yellow one you say may be “Modern Gray” Color.

 

[Periffery]

Ordered a set of white C6B to support all your hard work. What are you guys planning on using for amplification? I prefer room correction and HDMI input. Doesn’t need to be crazy as it’s a secondary setup. Was thinking maybe Wiim amp pro, but it seems questionable.

 

[Biera]

Ascilab C6B and F6B have been launched! Feel free to ask any questions, share feedback, or join the discussion.

Well then, first post here and this is it! Hats off for the incredibly work you've put into this.

Since I haven't found any pictures from below or information about it, I'll ask here if the speaker has any mounting holes to attach it to stands? Unfortunately, being child proof is crucial for me because of reasons

Cheers!

 

[Curvature]

Congratulations on beautiful and performant designs. Do you have future products in mind? I am looking for a speaker like yours with cardioid radiation, so pattern control down to 200-300Hz.