willy65000
Member
- Joined
- Apr 5, 2020
- Messages
- 30
- Likes
- 7
Hello. I've been lurking on this site for quite some time and now could use a little help with driver selection for a project. I have access to a pair of Elac Db62-bk-2.0 new in the box for non much money and would like to use them for a speaker project. I'm looking to build a pair of almost full range floor standers by using the Elacs in their original configuration as a tweeter/midrange combo with the factory crossovers still in place and a lower section beneath them that consists of either 3 6 1/2" woofers or 2 8" woofers that would cover the lower frequencies. I plan to use a Mini Dsp 2X4 as a two way crossover to split the frequencies at around 250-300hz. I'm not concerned with extension as much as i am with the quality of the lower frequencies. Think Revel F208 on a budget. Ideally i would like to stay under $400 for the drivers alone. I'm thinking that 2 "8 woofers per side is probably my best bet for my budget. Any help with driver selection would be greatly appreciated.