PortalKeeper
Member
- Joined
- Feb 8, 2023
- Messages
- 73
- Likes
- 7
Would it be okay (not breaking anything and getting SOTA sound) to feed the output of a Topping E70 DAC into this Scaler and then subsequently the output of the Scaler into an Audiophonics LPA-S400ET amp set on low gain?
The scaler has a red light that turns on when the output is greater than 10V which is conveniently about the maximum voltage the LPA wants to see on low gain mode.
The scaler has a red light that turns on when the output is greater than 10V which is conveniently about the maximum voltage the LPA wants to see on low gain mode.
