You are using an out of date browser. It may not display this or other websites correctly.
You should upgrade or use an
alternative browser.
-
-
P
Okay on the Ascend website, it says that these speakers can take 400W continuous and 600W peak. Where are you guys getting 300W?
-
P
That helps enormously, thank you!
-
P
You should perhaps find out a bit about Visaton.
One of the most experienced manufacturers whose chassis and development work have also...
-
P
The only problem I have is the DIY kits are not reviewed as much. Do you happen to know if that particular speaker has a high quality...
-
P
Ahh okay, I didn’t look at the spec sheet but thank you for confirming. I will end up going with a PA instead for this purpose.
-
P
No, that means that 300 watts is the maximum continuous load capacity for these speakers, as stated in the technical data.
Even with...
-
P
So does this indeed mean that putting a clean 400W of unclipped peaks into this speaker (entirely) would be okay for say 3 hours or is...
-
P
There seems to be some confusion about power driving the speaker and how much actual power will reach the RAAL 70-20xram, or any of the...
-
Loading…
-
Loading…