Last edited:
-
WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!
TOPPING HS02 coming
- Thread starter 192kbps
- Start date
If using USB powered DAC, it doesn't say how much (isolated?) current can be supplied @SHENZHENAUDIO
1A?
shenzhenaudio.com
@JohnYang1997
1A?
TOPPING HS02 USB2.0 Isolator
Descriptions: Fully lsolated Design The HS02 has a fully isolated design, which does not introduce new interference when the auxiliary power supply is used whi
@JohnYang1997
There are some legit use cases where isolators work, as shown below.
MEASUREMENTS: Topping HS01 - USB 2.0 Isolator & Ground Loop Eliminator (and a listen to Santana's "Blessings and Miracles")
A blog for audiophiles about more objective topics. Measurements of audio gear. Reasonable, realistic, no snakeoil assessment of sound, and equipment.
archimago.blogspot.com
ThatGuyYouKnow
Active Member
- Joined
- Jan 31, 2023
- Messages
- 140
- Likes
- 133
I don't know why Topping and the like haven't made a digital hub/switch that routes multiple USB and SPDIF inputs to a single USB output, with per-input settings such as UAC control. That would be extremely useful for some.
Sokel
Master Contributor
- Joined
- Sep 8, 2021
- Messages
- 6,112
- Likes
- 6,183
It was already alarming using (selectable) filters that mimic tube and SS distortion in one of their devices
"HS02 supports automatic identification of USB2.0 transmission at low, full and high speeds.
The powerful transmission capability is compatible with high-resolution audio such as PCM32bit/768kHz and DSD512Native. It's available now at US$99!"
The powerful transmission capability is compatible with high-resolution audio such as PCM32bit/768kHz and DSD512Native. It's available now at US$99!"
Most users will not need it but it could be a solution to get around earth loop issues. Another use could be to reduce the load on a computer by plugging in a 5V PSU into the USB C port. The RPI sometimes have problems supplying enough power for a small display, USB3 HDD and a DAC.
No it could be very useful.
MEASUREMENTS: Intona 7055-C USB 3.0 SuperSpeed Isolator. And Darko & Lavorgna hear no difference with the Silent Angel ethernet switch. [Importance of open discussions.]
A blog for audiophiles about more objective topics. Measurements of audio gear. Reasonable, realistic, no snakeoil assessment of sound, and equipment.
archimago.blogspot.com
ernestcarl
Major Contributor
The HS01 was able to solve one of my own audible noise problems (laptop plugged in another circuit and DAC+speakers in another) so it can be quite a handy tool to have in one’s audio toolbox.
How is it you get everything wrong, every time you post?
USB isolators are a viable solution to noise created by ground loops. Assuming this works correctly it will be useful in those circumstances.
There are some legit use cases where isolators work, as shown below.
MEASUREMENTS: Topping HS01 - USB 2.0 Isolator & Ground Loop Eliminator (and a listen to Santana's "Blessings and Miracles")
A blog for audiophiles about more objective topics. Measurements of audio gear. Reasonable, realistic, no snakeoil assessment of sound, and equipment.
Thanks for sharing this!
If using USB powered DAC, it doesn't say how much (isolated?) current can be supplied @SHENZHENAUDIO
1A?
TOPPING HS02 USB2.0 Isolator
Descriptions: Fully lsolated Design The HS02 has a fully isolated design, which does not introduce new interference when the auxiliary power supply is used whi
@JohnYang1997
Any info @SHENZHENAUDIO ?
