tmtomh

Would advise against B&W if you're after reproduction that's faithful to the source material. B&W designs usually put their own house...

Hello folks , I am in the market for speakers and from research conducted have corralled myself into possibly purchasing some B&Ws. I...

Generally B&W is not recommended on ASR. They have a house sound that impresses in the shop, but gets tiring when listening at home...

I’ve been clean and happy for over two years now. Ten feet from my desk is a sleeve containing a dozen or so op-amps sitting in my...

My first op-amp was the μA741 (designed in 1968) with no less than 20 transistors. Fortunately op-amps became better in the following 10...

Had some fun in Schaeffer's FrontDesign software yesterday: @decoRyder @dkinric @Red_Baron @bcurtin @TimF would be amazing if one of...

The little I got a chance to hear was impressive.

Well, I just heard from Paul at Genelec and they have the 8380s set up in their studio about 90 minutes from me. Setting up a time to...

Probably the Wiim, or a ground loop.

It's quiet with Wiim Ultra off, does that mean it's something else?

The 10B and the MiniDSP both have fantastic performance. Both have inaudible distortion and noise. However, for the application as a...

This is how all hifi should be built and designed flawless operation for decades !

Here are the specs from Bryston on the preamp and crossover, and the Final Check test report that was shipped with the 3BST amp. BP-25...

Here are the results of measurements of a stack of classic Bryston gear from the mid-1990s. A BP-25 preamp, 10B-Sub electronic...

I’m still waiting for your reply to the DM I sent three days ago. In the meantime, my team and I have gone through all recent emails...