Press OPTION.
An option menu screen is displayed.
When the input source is “HEOS Music”, an option menu for online music is displayed. Select “AVR Options…”, then press ENTER.
Use
to select “Tone”, then press ENTER.
The “Tone” screen is displayed.
Use
to set the tone control function to on/off.
| |
---|
On: | Allow tone adjustment (bass, treble). |
Off
(Default): | Playback without tone adjustment. |
Select “On” in step 3 and press
to select the sound range to be adjusted.
| |
---|
Bass: | Adjust bass. |
Treble: | Adjust treble. |
Use
to adjust the tone, then press ENTER.
| |
---|
-6 dB – +6 dB (Default : 0 dB) | |
“Tone” settings are stored for each input source.
This cannot be set when the sound mode is set to “Direct” or “Pure Direct”.
This item cannot be set when “Dynamic EQ” is set to “On”.
link
You cannot set this when no audio signal is input or in the menu “HDMI Audio Out” is set to “TV”.
link
It's not just in Heos mode though, I found the tone control menue when I connected an echo dot to the bluetooth input, very handy.