Although will be fine, it would annoy me! Faced with a similar challenge, I built some cables with right angled XLRs so I could push my Topping EX5 back closer to the wall behind it...
[..]
XLR Plugs are the 3-pin version of these:
https://www.amazon.co.uk/Rustle-Profile-Connector-Microphone-Female/dp/B097161C1K?th=1
Note that with these plugs allow you to have the cable coming out at any angle. Some of the other right angled plugs are fixed or have a limited range of adjustment. The downside of these plugs is that they only accept thin cable. I had to get creative with heat shrink as the external insulation on my cable was too thick to enter the plug.