Ok so I am torn on an amp for my setup. I was going to get a VTV amplifier with the NC502MP board. This would give me 350wpc at 8ohm. But even though the distortion is lower than older class D. It still scares me to use a class D amplifier for my speakers feeling I may hear the distortion.
The second option is 2 Schiit Vidars running in mono mode which would give me 400wpc. This would cost 1400 vs the 800 for the NC502MP. But in my head at least should sound better. I am not someone who believes SINAD is the best way to measure amplifiers.
Can anyone who has heard both amplifiers possibly give me some insight?
Will be used to power my front channels. Source coming from a Yamaha Aventage Receiver. Speakers Focal Aria 936.
The second option is 2 Schiit Vidars running in mono mode which would give me 400wpc. This would cost 1400 vs the 800 for the NC502MP. But in my head at least should sound better. I am not someone who believes SINAD is the best way to measure amplifiers.
Can anyone who has heard both amplifiers possibly give me some insight?
Will be used to power my front channels. Source coming from a Yamaha Aventage Receiver. Speakers Focal Aria 936.