That's the issue- pricey through retail channels. Wish someone would put the eval 4 in a ghent case with speakons and sell that for ~$1200....Its progress, but is pricey. Can have the Buckeye monoblock for $1150. Going to struggle with DIYing for that.
-
Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!
New Purifi amplifiers coming
- Thread starter mocenigo
- Start date
From the datasheet to me the most impressive part are these distortion elements below -130dB both on the low and high frequency range, from low power 10W up to 400W! This is crazy!
BossBunos
Active Member
I don't see the monoblock on their website?Its progress, but is pricey. Can have the Buckeye monoblock for $1150. Going to struggle with DIYing for that.
It is not shipping yet, I quoted from here…
Buckeye Amps: 2nd Generation Purifi EIGENTAKT 1ET9040BA Amplifier
Announcing our new Purifi 2nd generation EIGENTAKT 1ET9040BA Monoblock amplifier! Purifi 1ET9040BA Power Specs (1kHz, THD = 0.1%): - 375w @ 8ohm (peak) - 750w @ 4ohm (peak) - 1400w @ 2ohm (peak) 40A output current Custom Input Board: Neutrik XLR connectors Gold plated 5-way speaker binding...
www.audiosciencereview.com
Any idea why they are quoting the power at 0.1% THD+N instead of the 1% "standard" that the industry and themselves have been using until now?
I can ask but probably just a bit of marketing. Personally think the clipping point is the better answer.
Last edited:
A Purifi SMPS seems unlikely unless Bruno sees some major advantage to doing one. Would make more sense to rebrand from a volume producer. Otherwise, it is just more work for a bit more convenience (and mainly for the DIY market). OEMs will look to whoever produces supplies with the best price/performance.
Purifi has confirmed several times that they are working on a PSU.
Last I heard was next year, so its not close.
Sure, but optimized for which amp? My question is somewhat rhetorical btw as each needs different rail voltages to maximize output. This is another reason why it makes less sense for Purifi to do themselves. Falls under "just because you can, does not mean you should."
IIRC Purifi was developing a variable output SMPS and working through the necessary certifications.
EdW
Senior Member
I would have agreed with you but back in March 2023 Bruno gave an interviewExcuse my skepticism.
Got a pic or any evidence of more than a shadowy potential?
where he mentions that a forthcoming project is power supplies for his amplifiers (look from 21-07 onwards). Haven’t heard anything since then so who knows!
Thanks! Agree would be nice to see something more tangible. His statements reflect my own. Is more to round out the product line, but that could be done by contracting out. If no audible benefit, would rather see his talent applied to a DSP or something that be more audibly beneficial.
Purifi is seen by their shareholders as a tech company. Meaning that they have to innovate. Per my understanding, this power supply is indeed innovative, reason why it's development takes so much time. Not due to the development itself but more to the challenge to get the various worldwide certification bodies analyzing and validating the new concept.Thanks! Agree would be nice to see something more tangible. His statements reflect my own. Is more to round out the product line, but that could be done by contracting out. If no audible benefit, would rather see his talent applied to a DSP or something that be more audibly beneficial.
Ok great, but can you plan to build anything with one in the near future? Bruno already stated the current amp designs already deal with the power supply noise. Unlikely Purifi will be a value leader.. Am pragmatic about this stuff and like others, have seen ideas get killed even with the best intentions. Yes, certs take time too, but in the meanwhile, is anybody going to wait for the Purifi SMPS? I don't think so.
Yes, Bruno himself said that the modules are designed to be as much as possible independent of the PS noise. So his new SMPS would be more of a convenience solution for manufacturers by having a multi output single SKU, one stop shop product to order along with the other items. But should be hardly groundbreaking in terms of audio performance or value added to the end customer.
Until they finally merge the 2 together in a single board, more entry level price, and an NCore MP competitor is born.
Until they finally merge the 2 together in a single board, more entry level price, and an NCore MP competitor is born.
Last edited:
I had some discussion with the Purifi team at the Munich show.
The SMPS won't show up soon.
The SMPS won't show up soon.
EdW
Senior Member
Bruno and Purifi give us plenty of warning before a new product becomes available to purchase!
@mocenigo gave us the ‘heads up’ on the forthcoming 1ET9040 and even provided a picture, at the start of this thread 2 years ago and we still can’t buy it.
So I’m fairly certain that there will be business for MicroAudio producing SMPS with perhaps improved performance to Hypex for a little time yet . .
Though I’m not sure what advantages the Purifi SMPS might confer. Improved efficiency? Unlikely to improve amplifier performance since the 1ET9040 design is robust to power rail noise according to Bruno.
Similar threads
