Manojrc
Member
- Joined
- Oct 4, 2020
- Messages
- 47
- Likes
- 13
Dear All,
New to Dirac in particular and room correction/EQ in general. So please go light on my question. Bought a Roon subscription few months ago and loving it.
Now want to do PC based room correction using Dirac with Roon & I just activated the 14 days Dirac evaluation license. Now this is what I've:
1) Dirac Live 3 software for WIndows
2) Ryzen 7 Laptop & Windows OS
3) Roon subscription
4) UMIK-1 mic
5) RME ADI-2 FS DAC
6) Yamaha integrated amp
7) Full range, high sensiitve, wide band driver based floor standing speakers. The woofer part of the speaker is active. Speaker doesn't offer any bi-amping option. It has a built-in passive cross over and an active bass system. The picture of the speaker can be seen here ( https://www.stereophile.com/content...a-cartridge-yamamoto-amplifier-rethm-speakers).
Speaker spec can be found here. ( Search for 'Saadhana'). https://www.underwoodhifi.com/products/rethm
Additional points :
8) No plan to add sub woofer(s) at this moment. May be later. So please don't recommend it !
9) Tried REW but failed to get the desired result may be because I did it wrongly. So please stick to Dirac solution !
10) No immediate plan to add any H/W solution. I may buy miniDSP SHD in the future, but that's not a concern at the moment for this solution
11) Room size is 20 ft x 14 ft x 9 ft
Now please help me to configure Dirac. If this is discussed already, please share the link.
Thanks..
New to Dirac in particular and room correction/EQ in general. So please go light on my question. Bought a Roon subscription few months ago and loving it.
Now want to do PC based room correction using Dirac with Roon & I just activated the 14 days Dirac evaluation license. Now this is what I've:
1) Dirac Live 3 software for WIndows
2) Ryzen 7 Laptop & Windows OS
3) Roon subscription
4) UMIK-1 mic
5) RME ADI-2 FS DAC
6) Yamaha integrated amp
7) Full range, high sensiitve, wide band driver based floor standing speakers. The woofer part of the speaker is active. Speaker doesn't offer any bi-amping option. It has a built-in passive cross over and an active bass system. The picture of the speaker can be seen here ( https://www.stereophile.com/content...a-cartridge-yamamoto-amplifier-rethm-speakers).
Speaker spec can be found here. ( Search for 'Saadhana'). https://www.underwoodhifi.com/products/rethm
Additional points :
8) No plan to add sub woofer(s) at this moment. May be later. So please don't recommend it !
9) Tried REW but failed to get the desired result may be because I did it wrongly. So please stick to Dirac solution !
10) No immediate plan to add any H/W solution. I may buy miniDSP SHD in the future, but that's not a concern at the moment for this solution
11) Room size is 20 ft x 14 ft x 9 ft
Now please help me to configure Dirac. If this is discussed already, please share the link.
Thanks..