Sokel
Master Contributor
- Joined
- Sep 8, 2021
- Messages
- 6,161
- Likes
- 6,261
I really don't know that's why I edited and posted the spec's I have in hand.I understand your point, but how about the transient movement behavior of your "voltage" meter? Is it compatible with the IEC VU (volume unit) meter standard/specification?
I mean "The rise time, defined as the time it takes for the needle to reach 99% of the distance to 0 VU when the VU-meter is submitted to a signal that steps from 0 to a level that reads 0 VU, is 300 ms. The overshoot must be within 1 to 1.5%. The fall time is the same as the rise time, 300 ms."
Any help will be valuable!