Do you thing about laser cutting? Model could be to use for 3D print a so for laser cutting (more parts).
Do you have a 3d printer that you could use to do some test prints? Also, when the tone board is plugged in via usb c, is pin 20 powered to 3.3 volts? or are only the 5v pins powered?
Also, I blame you all for my latest impulsive purchase... and hate the fact that the board will take to the 2nd of December to get here
Edit: Alright, gave it a shot based of the dimensions from @TimW 's post. I'm also just gonna leave the pieces as a friction fit instead of designing some locking mechanism, at least for now... Please note that this could be completely off as I don't have the board yet, and have not tried test fitting it at all. Print at your own risk. Also, I plan on adding stuff like the labels after it's confirmed that the case itself fits
Thanks for the model design. I'll tell you if it fits the actual tone board if mine ever gets out of customs. Originally I was making one myself based on TimW's dimensions but saw that you had made one already so I printed it out on my Monoprice Mini v2 with draft settings at 0.2625 mm layer height using some really, really awful old PLA that strings and under extrudes that I use for drafts like this. Came out mostly fine and the front friction fits as well at this print setting.Do you have a 3d printer that you could use to do some test prints? Also, when the tone board is plugged in via usb c, is pin 20 powered to 3.3 volts? or are only the 5v pins powered?
Also, I blame you all for my latest impulsive purchase... and hate the fact that the board will take to the 2nd of December to get here
Edit: Alright, gave it a shot based of the dimensions from @TimW 's post. I'm also just gonna leave the pieces as a friction fit instead of designing some locking mechanism, at least for now... Please note that this could be completely off as I don't have the board yet, and have not tried test fitting it at all. Print at your own risk. Also, I plan on adding stuff like the labels after it's confirmed that the case itself fits
What was the material cost for it?I'm happy to help with prototyping if this doesn't fit on the first pass.