-
Welcome to ASR. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!
Behringer B2031A Measurement (broken sample?)
- Thread starter amirm
- Start date
Penelinfi
Addicted to Fun and Learning
- Joined
- Apr 22, 2021
- Messages
- 798
- Likes
- 626
Yep I'm really hoping this gets measured eventually. I've done the port fix wrt to the resonating tubes.
What does this entail?
Penelinfi
Addicted to Fun and Learning
- Joined
- Apr 22, 2021
- Messages
- 798
- Likes
- 626
Removing the front faceplate/tweeter, damping the large flat sides of the port tubes with something, or wedging a rubbery thing between the flat side and the cabinet wall.
If you tap the port tube at the front of the speaker, you can hear its resonance originally. That will be subdued if you damped it well.
Likely nobody wants to throw money at another speaker…
Almost as important to see how Behringer handles warranty replacement as how well it measures.
Almost as important to see how Behringer handles warranty replacement as how well it measures.
AlexanderM
Active Member
- Joined
- May 1, 2021
- Messages
- 299
- Likes
- 210
Last word from Amir was they had taken his speaker and then gone dark. Always order from Amazon, then can return, is my advice.
That alone is a big no for consumer no matter how cheap it mightbe, you don't need to have such a dud unit, it says a lot about QC and consistency, having a less than stellar designed speaker is one thing, but it's better than having a speaker performs well when it's a golden unit, and then just the L and R channel is uneven, especially above schroder frequency where user can hardly use in room EQ to fix direct sound.
could be a tough job, if one bought a operational unit, which I believe would sound great especially for the price as it basically cloned a great design, who would like to pack it up, send it to amirm and wait for a few months before getting it back? ppl at this budget range usually don't have a spare system for enjoyment during the review process
IIRC correctly there was a speaker shoot-out in the US some years ago, where this speaker beat the Linkwitz dipole speaker. After the results were posted on diyaudio.com, a lot of people in the US would have bought them. Likely many have moved on to other speakers or only have them as backup speakers, so probably there is someone who can ship one out.
Anyone registered on diyaudio.com want to put the word out?
Is there any progress with this speaker here?
In the mean time there is a spinorama of a Beringer B2031A available.
www.spinorama.org
In the mean time there is a spinorama of a Beringer B2031A available.
Measurements for speaker Behringer B2031A
www.spinorama.org
Looks like a worse version of a Genelec 1031... Which makes perfect senseIs there any progress with this speaker here?
In the mean time there is a spinorama of a Beringer B2031A available.
Measurements for speaker Behringer B2031A
ZööZ
Addicted to Fun and Learning
- Joined
- Nov 10, 2020
- Messages
- 635
- Likes
- 423
Topping E2x2 Audio Interface Review
This is a review and detailed measurements of the Topping Professional E2x2 audio interface (ADC, DAC, Headphone Amp). It was sent to me by the company and costs US $159. As the British would say, the E2x2 definitely "looks the part" as far as fitting in the general offering of interfaces in...
www.audiosciencereview.com
OUCH!
Similar threads
