YSC

I am really interested in the C6B, all white looks quite good and tempting.

It will need Genelec official support to be possible to answer all these, but I will bet they are calibrating through individual...

NNice room, but you sure it's a good idea to put your bird cage on top of a sub? your bird likely will hate you:cool:

That sounds like what I used to do day by day to troubleshoot my local contractor workers who can mess up with equipment setup every...

This might be off a lot of people's radar, but as a suggestion for an unlikely career.... If someone has a broad skill set, enjoys...

Left a message, got a return message, and will be discussing possible work tomorrow. Thanks, Amir

This makes me have some hope! will be open to any remote/job opportunity as a geologist :D

You never know. Many of us are in professions not associated with electronics. I have a friend from my younger days that is a...

Actually, for 5 years of daily use of the 8030C, I cannot hear any hiss, coz I used it in the lowest sensitivity setting (turn the knob...

As such, pure technical speaking the KEF R3 meta or even the Reference 1 meta fits the bill.

Wonderful initiative, but likely can't help me though, geologist in HK is not going to get hired in ASR

is the driver wraped significantly?? I would pull the trigger to replace that driver, a pain to look at it

and ATC has relevant competition.

Purifi drivers are very low distortion. Therefore, the short answer is yes. However, the benefit would be relatively small. If you want...

If the modes are not so pronounced don’t see any reason to EQ, mines were “humming” a lot in two particular frequencies, and when adding...