denon

  1. U

    FS: Denon AVR-X3700H AV Receiver; 9.2ch 8K AVR with 3D Audio & HEOS

    I have an immaculate condition Denon x3700 receiver for sale for $995. I bought based on all the fantastic reviews it received on websites like audiosciencereview and others. The reviews said it had low distortion and was very clear. I 100% agree. It is two years old. I babied it as it was the...
  2. D

    F/S: Denon AVR-X6700H 61068 local pickup only. $1850

    $1850 For Sale is: Denon AVR-X6700H purchased from authorized dealer on 9/9/20 and installed in open audio rack with AC Infinity AIRCOM T9 on top. Living room set up with no kids/pets/smoke. After one year I bought cables and amps and ran in pre/pro only. I have never had an issue operating it...
  3. U

    SOLD: Revel Performa m105

    I’m selling a like new pair of Revel Performa m105 speakers in black color. I purchased these brand new a year ago and only used these for two speaker shootouts. They look and sound fantastic and are very neutral. I realized I don’t like that neutral sound. That’s the only reason I’m selling...
  4. L

    Denon X4500H. Most like which reviewed Denon?

    So Amir has reviewed the following Denon items: X3500H X3600H X3700H X4700H The X3500H didn't do well (especially for internal DAC, which I would use), the others did much better. I am thinking about picking up an X4500H. In terms of performance, would it more likely be like the X3500H or...
  5. Wack Audio

    Best amp under 500$?

    Despite weeks of research I can’t seem to find an amplifier that majority of people agree is a worthy unit. I am looking for sound quality mainly, and will use Elac B5.2 along with a Dayton sub1200. I currently have a (2011) Denon AVR 591 home theater receiver. This was their base model amp back...
  6. B

    Audyssey Multieq-X: Real bi-amping with active crossover

    Denon AVRs have an option for bi-amping the main speakers. My understanding is this is the typical “passive bi-amping” where the same signal is sent to both, as there is no crossover functionality implemented by default. However: * Denon AVR already have active speaker/subwoofer crossovers. *...
  7. luft262

    Denon X3700H vs x4700H

    The Denon X3700H is about $1,500 and the Denon X4700H is about $2000. These AVRs represent the best of the budget I am willing to spend on my next AVR. As far as I can see the only differences are that the X4700H has DDSC, Clock Jitter Reducer, Alpha Processing, and 20 extra watts per channel...
  8. Oski1997

    Denon increases prices for 2022

    Is it just my memory going bad or did Denon just increase the prices of their AVRs by $100 for 2022? Marantz prices remained the same. They started using the inferior PCM1502A DAC and now they're charging customers more for less quality sound? wow https://www.denon.com/en-us/category/av-receivers
  9. D

    Denon Heos Distortion Problem

    Hey, came across a wierd problem, my Denon 4700 distorts any music I play via Heos, the highs made me think my DBR62s had turned into a B&W ;) Apparently looking at the 4700 thread Im not the only one encountering this problem. Has anyone found a solution yet, seems to be a software issue. Thanks
  10. K

    Buzzing in Speaker

    Hooping for some advice. Having a buzz thru my Speakers. Buzz is independent of volume and is constant. When using my Denon 4700 and any devise it is quiet. When adding a power amplifier i get a buzz. Tried 4 different. 3 grounded 1 un-grounded (30 year old Sansui). Only with the Sansui it is...
  11. ad_fletch

    Preamp quandary for 2.1 or 2.2 stereo

    Hello, I've been reading for quite some time all the threads I can find about how to do a decent but affordable 2.1 or (ideally) 2.2 setup for music. Source is a Windows tablet running Foobar2000 + EqualizerAPO through a Meizu Hifi Pro dongle - prefer this to previous setup of Chromecast Audio...
  12. F

    Moving from a X6200W, help deciding between a X6700H or X4700H

    My precious X6200W of six years, took a good bit of a power surge, from a nearby lightning strike a few weeks ago. (HDMI 1 port is dead, all kinds of sporadic EDID issues between devices, and the pre-outs no longer work) My setup is 7.1.4, with the two rear heights powered by a 2-channel amp...
  13. walt99

    AVR input levels from DAC

    So I have a Denon A110 which is basically the same as the 8500. The Denon analog input spec states 200mv and when I inquired to Denon support they said the same thing. I have the X16 at 0db and previously the node2i at fixed volume plugged in and have not heard any signs of distortion/clipping...
  14. WaynesterUK

    80hz on my speakers after calibration on Denon AVR? advice

    Okay! a controversial topic! can I ask why you guys say to put all crossovers on fronts centre and rear surrounds at 80hz? After I’ve run Audyssey on my Denon AVR-X2200, it always sets my Fronts, rears and centre at 40hz... I then always change them to 80hz as the recommendations, then I set...
  15. L

    I feel like HEOS is overlooked!

    Hi all, I have now owned 3 Denon / Marantz receivers with HEOS (3500, 3600, and SR6012). I always discounted it as a solution for the lazy or as a Sonos replacement, never thinking it was up to snuff for my “serious” (lol) listening practices. I previously used a Chromecast Audio into a DAC...
  16. xcomp666

    Denon X3700H or Marantz SR6015?

    Hey Guys! First of all. I really love this forum content. So, I am looking for a new AVR to replace my old's NR1506 that I bought 4 years ago. I am interested in the new 8k Denon/Marantz lineup but I would like to hear from you guys. What's your recommendation? Denon X3700H or Marantz SR6015...
  17. G

    Choosing between Denon AVRX4700H and Marantz SR7015. What should I get?

    I have an LG C9 OLED TV with KEF Q-750 towers, Q-650 center, Q150 rears, KUBE12 sub, and Onkyo410 Atmos. I plan on adding maybe 2 more 150 side speakers. I've borrowed my brothers Yamaha RXV579 last 2 months waiting for a receiver with HDMI 2.1 - anticipating PS5. Usage: 50% movies/sports...
  18. HionHiFi

    How to Hot Rod a Denon AVR-X3600H?

    How can we hot rod the Denon AVR-X3600H Receiver to get more performance out of it? Based on Amir’s review and measurements here, the X3600H is good platform to build a home theater or even a 2-channel system around. I have a 2-channel system. I, for one, would like to add a higher powered...
  19. O

    AVR Decisions - Anthem, Arcam, Denon, Yamaha...?

    Hi, folks. As a few of you might remember, I've recently bought a 4k UHD television followed by a Panasonic DP-UB820 player. I'm in the process of designing a new equipment cabinet in an attempt to overcome my wife's objections to the tendency of AV black boxes to procreate when she's not...
Top Bottom