OCA

Not exactly cheap but not expensive either given it's an integrated amp with a descent DAC and HT bypass, etc specs Rotel Michi X5 will...

Here's the full js code. It needs node because works over telnet. It will find your AVR in the network automatically. The volume...

It's in the Nexus video download folder as an exe file. There's also a Mac version...

Dynamic EQ pretty much correctly applies bass and high frequency boost according to the long replaced ISO 226:2003 equal loudness...

Introduction This is my first post after I have been reading and benefiting from this forum for roughly two years. I am no trained...

Your main advantage with rePhase will be ability to add non-causal filters. All MSO filters are causal including IIR and allpass...

Roon doesn't need zipped files or a config file. Export your left and right speaker filters as one "stereo" .wav file at 48kHz sampling...

It's fixed at 224Hz by default. You can check all these in the script itself, it's open source.

A1 only corrects what can and should be corrected which are peaks in the bass frequencies caused by wall reflections. These wavelengths...

Interesting...Then the sub response is causal like min phase, non-invertable but IIR also isn't, just has extra group delay that makes...

You are not aligning them to the MP version when it's measurement #3, move it to the top and re-try.

I was talking about CC align over the MP version. My guess is their peaks will align and they will be in opposite directions.

Cross correlation align them and see how it shifts.

The min phase version of the sub's response vs what I believe to be the filters at work on that sub (there's probably another lpf higher...

Definitely not but I know they all have a flattish response at least in a certain frequency range and don't exhibit a 12dB increase with...