It is on my todo list to measure my three Stax amps. They are much older than current ones but will give us some data points. I will need to build a safe connector that avoids the high voltage bias.Something like the Stax SRM1 Mk2 would be interesting to see. But is that even possible for the Audio Analyzer? The Output should differ a lot from normal headphone amps.
I will need to build a safe connector that avoids the high voltage bias.
Yes although I don't know how high. My AP analyzer can accept up to 150 volts. If they are higher than that, I have a differential probe with 10:1 attenuation I can use. I am going to instrument it with my scope and this probe first before performing any measurements.The signal voltage is high, too, is it not?
How does what compare? The amps I have? If so, one is solid state. The other two are tube. One is single-ended and the other balanced.How do they compare?
How does what compare?
Alternatively I can open the box and go before the transformers.
Good to know! I am just curious if they Line Outs on these devices are any good, or if they affect the signal in any way.It is on my todo list to measure my three Stax amps. They are much older than current ones but will give us some data points. I will need to build a safe connector that avoids the high voltage bias.
Amazon says I bought one of these last year:
uDSD Hi-resolution USB-powered Portable DAC (PCM 384, DSD 256) & Headphone Amp
https://www.amazon.com/gp/product/B00VUIRHWK/ref=ppx_od_dt_b_detailpages00?ie=UTF8&psc=1
I suppose I should find and review it sometime.
Yes I did. It is a pretty solid little device mechanically. I will see if I can review it quickly....Did you find it? I have one also. Very interesting how it measures.
Here is your review: https://www.audiosciencereview.com/...nd-measurements-of-nuprime-udsd-dac-amp.6277/Did you find it? I have one also. Very interesting how it measures.
That was my mistake as well, those are Singapore dollars, in USD it is $650. I'm considering to buy one after hearing lots of praise.or DAC DENAFRIPS ARES (cost 888$) Thanks all.
https://www.denafrips.com/ares
Ah, that is not as expensive as I thought. Are you in US and if so, want to buy one for me to test?That was my mistake as well, those are Singapore dollars, in USD it is $650. I'm considering to buy one after hearing lots of praise.
Alas, I'm in Eastern Europe (Ukraine), otherwise, I'd gladly do that.Ah, that is not as expensive as I thought. Are you in US and if so, want to buy one for me to test?
Oh hello, fellow countryman. Which city are you from?Alas, I'm in Eastern Europe (Ukraine), otherwise, I'd gladly do that.
Oh, nice to meet you! I'm from Kyiv too! I'll write to you in personal messages so that we don't pollute the thread.)Oh hello, fellow countryman. Which city are you from?
I looked up its specs and saw this:@amirm I just received the Hiby R6 Pro DAP, Would you be interested in testing this latest and "greatest" DAP?