MotU is on fire! One month after, a new firmware update with plenty of improvements.
MOTU Gen 5 Installer
Version: 92060
Release Date: Aug. 30, 2022
Supported Platforms
Windows 11, Windows 10 64-bit
Changes
- Improved support for Jamulus.
- Implemented firmware update recovery mechanism.
- Added a checkbox to CM5 and the MSeries GUI controller to enable or disable synchronizing the Windows sample rate to the device. Enabled by default for better performance with more Windows audio clients.
- Allow ASIO clients to change the buffer size.
- Improved audio stability when the host is receiving MIDI input from the device.
- Fixed an audio glitch that could occur for non-ASIO clients (particularly at large buffer sizes) when the system sample rate does not match the device's.
- Improved performance for clients using Windows audio APIs.
- Improved performance for ASIO clients using small buffer sizes.
- Adds makeup gain to compressors.
- Adds EQ to Reverb bus.
- Adds Mix USB Channels menu.
- Adds additional sources for phones and loopback.
- Adds defaults button to reverb view.
- Adds headphone source menu.
- Additionally allow Reverb Dry Mix or Reverb Wet Mix to be the loopback source.
- Additionally allow Reverb Dry Mix or Phones Mix to be sources for TOSLink and/or SPDIF.
- Allow moving loopback channels to host input channels 1 and 2.
- Allow mixing host output channels in the Reverb Mix bus.
- Improves stability for WDM streams at large buffer sizes (Win).
- Support for 2048 and 4096 sample buffers at 1x sample rates, and 4096 sample frame buffers at 2x sample rates (Win).
- Restricts updating to incompatible firmware versions
- Bug fixes and improvements.
The above description pertains to the new CUE driver version 4.0.9.2060
The release notes for the new firmware are:
-UltraLite-mk5 Firmware: Version: 1.1.7+2398
-Release Date: Aug. 30, 2022|
-Summary Changes:
Improved USB error recovery.
Adds makeup gain to compressors.
Adds EQ to Reverb bus.
Adds support for mixing additional host output channels.
Allow moving loopback channels to host input channels 1 and 2.
Allow mixing host output channels in the Reverb Mix bus
Improved clipping behavior with phase invert turned on.
Fixed an occasional issue with startup after soft power on, where inputs would be scrambled or contain static.
Fixed repeated buffer when connected to powered USB hub, and hub is disconnected from host.
Fixed MIDI on Windows.
Bug fixes and improvements.
-Install Instructions:
Latest version of CueMix 5 is required for (firmware) installation. If an update is available for CueMix 5, please install this first. To update the firmware version in your UltraLite-mk5, open CueMix 5 on your computer, navigate to the Device tab and click "Open..." next to "Firmware Updater to launch the firmware updater app.