Silou
Active Member
- Joined
- Oct 5, 2018
- Messages
- 245
- Likes
- 114
Since I will have a lot of spare time in the next weeks, I want to build myself something nice
First Project: passive filters for my HD58X Jubilee/Amiron Home/K712 Pro (by solderdude) built inside a case with one input socket for the headphone and one output for the amplifier. I want to wire the three filters using this thing, so I can switch between them and only use one pair of sockets. I want to add three LEDs so I know which filter is selected.
Second Project: This is just an idea of mine. I am not an engineer and electronics is not my main knowledge area, but I like to build things myself.
I want to use two (or do I need 4?) objective2 boards to built a headphone amplifier with a 4-pin-XLR output. The idea was to use one board per channel so I can double the output power. Please comment if this works this way or if it is nonsense
Third Project: First + Second Project combined with Tone Board as the DAC in one nice looking chassis
First Project: passive filters for my HD58X Jubilee/Amiron Home/K712 Pro (by solderdude) built inside a case with one input socket for the headphone and one output for the amplifier. I want to wire the three filters using this thing, so I can switch between them and only use one pair of sockets. I want to add three LEDs so I know which filter is selected.
Second Project: This is just an idea of mine. I am not an engineer and electronics is not my main knowledge area, but I like to build things myself.
I want to use two (or do I need 4?) objective2 boards to built a headphone amplifier with a 4-pin-XLR output. The idea was to use one board per channel so I can double the output power. Please comment if this works this way or if it is nonsense
Third Project: First + Second Project combined with Tone Board as the DAC in one nice looking chassis