MCH

I use these controllers for volume control and FF/RW, moving text cursor, scrolling through streaming music list,etc. I removed the...

I don't think a straight answer exists. There are so many things to take into account, durability, friction. Imagine just the pressing...

ES9280 is a single chip codec that integrates ussb bridge and ADC for mic input, while JM20Pro needs one or two external chip for those...

Probably, but fosi also got very much inspired by the 3e audio boards, and let's not forget that Aiyima were the ones that bring the...

I do not know details of the WebOS used in the LG TV, but the open source WebOS...

This is a review and detailed measurements of the AIYIMA A70 Mono TI TPA3255 based class D amplifier. It was sent to me by the company...

Not sure if it fits more here or your other thread, but covestro makes noise absorption foam, mostly for automotive I reckon, under the...

Your mileage obviously varies from mine. I have been using Sonos products (Connect, Bridge) for close to twenty years, and they have...

I was just browsing some studio/pro-gear websites and came across the Audient EVO 16, which might interest some people. It seems to have...

None, technically it's the preferred way. But you need to have all I2S clocks generated externally, i.e. either two dividers (bitclock...

The LSR305 is a great speaker for the price, but it has some key flaws. @Erin in particular noted a nasty resonance around 220Hz in his...

Received the RPi 5 and tried actually recording the I2S input coming from the extractor. No surprises here: was able to capture PCM just...

What I mean is that many cables, even if not advertised as 75ohm impedance, are not very far away. You can use these calculators to...

Impedance calculators for both PCB traces and cables are available online and the information needed is normally available in the...

PLL will by principle produce higher jitter that a fixed crystal-based clock. That's why I call it suboptimal. A precise measurement...