Womaz
Active Member
- Thread Starter
- #21
Again thanks for your input.I understand, electronics are ‘done’ just look at Amir’s list of dacs and amplifiers Hypex/Purifi/Benchmark all superb, what you might consider is acoustically measuring your room with a microphone and REW software ( which costs virtually nothing) and then introducing a mechanism for implementing any filters it suggests just to control the low bass region.
This might be software with Peq, dacs with eq, streamers with eq sorting out the bass is almost certainly the largest improvement in SQ one can make.
Keith
I would want an amp with a DAC as the minimum. I would ideally like to reduce box count not increase it.
As I said to another member on here I have zero inclination to start measuring with Microphones etc. I do really appreciate your input though.
I will loom at Amirs list to see if any of my shortlist are reviewed