rme

Just boored. Sitting in the cave, fooling around with the camera. Just finished a project. The decoupling plate under the units. 5mm of cork, 14mm floorboard and 2 layers of butyl rubber(total 4mm). Framed with some white oak I cut up to fit. 3.2 kilos. TC electronics Clarity M is a mighty cool...

Hey all I have a question about my setup and hoping someone can help with some recommendations. I’m purchasing 8341s with the GLM kit and volume control. I currently have an RME ADI DAC 2 which takes the usb from my Mac and optical input from my Aorus FV43 monitor (from hdmi input) and runs...

More power and 4.4 mm Pentacon, yay! https://www.gearnews.com/superbooth-2022-new-rme-adi-2-4-pro-se-dac-interface-spotted/

Hi I'm a total newb and also Korean and I'm not used to this thread stuff, so sorry beforehand if I've made any mistakes I've nearly made up my mind on buying Genelec 8330A+GLM kit as my monitoring system and trying to find a suitable substitude for my audio interface M-Track 2X2. My main...

I’m planning to connect my RME ADI (functioning as a DAC/Preamp) to PowerAmp NAD C298 through XLR. This is my first XLR experience and I have two questions? (1) there is a note in the RMe manual (regarding 3 pins) which I don’t understand its implications. Please see the note as attached, and...

I have performed my first measurement with UMIK-1 and REW. I need your help to understand how to generate & translate my EQ measurements into RME parameters. I could not find a way to generate EQ according to RME parameters and capabilities. I tried using Generic EQ with 7 filters but didn't...

Hey there! About 8 months ago I started learning music production on my own and I decided to start buying some stuff to set up my home studio. At the moment I have a MIDI keyboard and a pair of Audio-Technica ATH-R70x headphones. The problem is that these headphones have an impedance of 470...

Hey Guys What are your opinions on the difference in quality of converters ? Currently using babyface pro fs + adi-8 ds mk3 I need more i/o so looking for an upgrade - the UCX is more affordable for me of course but i do want high quality of conversion - is it worth saving a but more and getting...

After the recent measurement I did for the unbranded ADC I got off eBay, to compare a friend borrowed me a relatively similar device by a thomann.de house brand - Swissonic Converter AD 24/192 that sells for about 40€: Basic features are mostly the same, except this one comes with a power...

Recently I was looking for a cheap ADC and found a generic, unbranded one on eBay for just under 10$ (UPC: 6927373037416). Here's a few pictures of the device: My plan was to use an ADC to connect my turntable to a digital input of miniDSP OpenDRC-DI, but I didn't really want to spend much on...

SOLD. As-new condition. Includes remote, power supply and original box with paperwork. $825 shipped CONUS. https://www.audiosciencereview.com/forum/index.php?threads/measurements-of-rme-adi-2-dac-and-headphone-amp.7546 https://www.rme-usa.com/adi-2-dac.html

Closed - looking at Octo Research dac8 PRO, paired w. Roon + Convolution or MiniDSP.

Hi all, I currently have a Beresford Caiman Sed TC 7535 Dac with upgraded firmware and a Arcam rHead amp. I'm looking at possibly changing to a combined unit or a matched stack. Budget is approx £800 with £900 being the absolute top limit. I've been looking at the Naim DAC V1, Audiolab M-Dac...

Hello everyone. I just joined ASR. I am considering buying a Matrix element i, or RME ADI-2 FS (in which case I will use my existing Yamaha WXC-50 as a streamer and send its digital out to the RME via Coax or Optical). At Present I have Ripped CDs and HiRes Downloads in a USB Drive hanging off...

Anyone wants to sell a RME ADI-2 DAC FS shipping to Brazil? Send me a private message then. :)

RME ADI-8 QS | 8 Ch. 24 Bit/192 kHz Remote Controllable AD/DA Converter ADAT/AES On Ebay Price: $1,599.99 https://www.ebay.com/itm/RME-ADI-8-QS-8-Ch-24-Bit-192-kHz-Remote-Controllable-AD-DA-Converter-ADAT-AES/202682261309?

Given that the MiniDSP SHD and the RME ADI-2 Pro fs both use the same AKM chips, have similar specs, and in Amir's DAC testing showed very similar performance, is it safe to assume that the ADC performance of the MiniDSP SHD is likely to have a SINAD within a few dB of the RME ADI-2 Pro fs? I...

I don't need A/D conversion anymore so i sell this jewel, i can trade with a DAC, in case please send me you offer. Unit is in Switzerland but i can ship all over the world. Bought in February 14th 2019. Complete with original boxes and accessories, nearly mint 9/10, no scratch. My request is...

Will my Sennheiser HD600 sound better with the Topping D10+JDS Atom than with the RME Babyface Pro? I ask specifically about my headphones, not about some super-hard-to-drive planar-magnetic ones. And while I am already asking - will they sound even better with the THX 789+some dac? Story: I...

Selling a mint condition rare beauty, the RME ADI-2 Pro Anniversary Edition. Only 500 units manufactured. Asking 1200€, located in Helsinki Finland. Box etc all included. Picture of the beauty from the internet :)