rew

This thread is mostly directed at @OCA to continue YouTube comment section discussions in a little easier format, but maybe it will be helpful to others. First system I'm working on is my office desktop setup, in a carpeted bedroom that's approximately 4.7m x 4.1m x 2.9m. I live just under...

Hello, I am totally exhausted. I got a Behringer EMC8000 and connected it to my Focuswrite Scarlett. I used this cable https://www.thomann.de/de/cordial_ctm_3_fm_mikrokabel_schwarz.htm Is this the wrong cable or why does just nothing work? No deflection of the microphone appears in REW...

Hello guys! I was wondering is it possible to correct the phase using REW mathematics? What prevent us to use this app potential to get rid of excessive phase elements in our measurements and get nearly perfect FIR filter which then could be used in Roon or Equalizer APO? Of course there is...

Hello, lovely people. I have a small YouTube channel that focuses on car audio measurements and testing. Since I joined SQ (sound quality - opposite of SPL) community, I realised that a lot of car audio is based on myths and fairy tales from "back in the day". My goal is to start fresh and test...

Hello, I did some analysis of my 2 channel setup, soon I would also like to use it as a theatre setup also. Room is a 12x16, there is a serious destructive interference between 45hz and 60hz, I think one way to solve this is using 2 x Subwoofers. Let me know what you think ? Here's a...

Hi, how can I put two graphs in REW and visualize only the difference between them. For example: Graph 1 has +15dB at 5kHz, Graph 2 has +10dB at 5kHz, the difference should display +5dB at 5kHz. Thanks in advance! :)

Hi again ASR community. Some time ago you helped me a lot in this thread Since then I have changed my audio setup and now it is KEF R3 with Lyngdorf TDAI-3400 streaming amp. Below please find the measurements I did using REW and UMIK-1 mic with RoomPerfect enabled (Lyngdorf room correction...

I currently have the XLR output of the Gustard DAC going to a Buckeye amp and it works well. The way I integrated the sub is with high level (speaker wires) since I don't have a receiver with LFE output and DSP room correction and speaker volume adjustments. I have the sub crossover dialed in...

The other day I mentioned elsewhere this wonderful video by @OCA. It covers many topics but it has one little trick that is so genius that I think it deserves its own thread. In short it is to make Audyssey believe that there is nothing to correct about your speakers and your room. This turns...

Dear All, I've bought a MiniDSP nanodigi, 2 8" subwoofers and a UMIK-1 and I've been experimenting with them for 20+ hours now. For my latest configuration, I have done the following: 1. REW sweep measurements in bass region for each of the 4 drivers for 3 LPs, I used acoustic reference on the...

I am sharing my REW measurements seeking for conclusions, thoughts, EQ and/or room treatment advise. What you see are the measurements of my main(2,2m) as well as my secondary(5m) listening position in a 30m2 non treated but really cared(curtains, carpets, furniture, canvas, positioning) room...

Currently my SMSL SU-10 DAC is also the preamp for my Audiophonics HPA S400ET poweramp via balanced connection. Powered sub is KEF KC62, fed by unbalanced output from SMSL. My room has a floor to ceiling glass wall & patio doors to entire left side. WAF precludes most acoustic treatment. Looking...

Hello everyone. Today I did a little experiment: I downloaded the Harman 2018 over ear target curve from AutoEQ repository and also the headphones measurement available there. I then used REW to equalize the headphones to the downloaded Harman target curve and, unexpectedly, the result doesn't...

I was wondering if one could flatten out a microphone by inverting the frequency response found in a graph. I would like to get a taste of the result without having to buy an expensive microphone for this... There's a Superlux microphone, which is pretty cheap, but requires an audio interface...

Hi all, So I set myself up today to re-calibrate my system which I was looking forward to but have had problems with REW not seeing my DAC's digital interface? I use an RME ADI2 PRO fs be and am connected to my laptop via a USB cable yet REW only sees the analogue 1+2 interface? Can anyone shed...

Room is almost a square (9x11 feet), with one side being a long doorway opening, to a larger room, therefore no right wall really. Right wall 5.5 feet away from Mic, with 3 windows. Mic is almost positioned in the middle of the room. There is pretty much no left wall as you can see. All graphs...

Hello! We have a PC connected to the TV in the living room which we use for streaming and music listening. Using a combination of measurement mic, REW and EQ APO I was able to bring the room FR to the following level. What I don't know is whether this is good enough or not or should I continue...

Were can i learn how to read frequency responses and what they mean? ..i have been using REW for a year now and there is still lots of questions i have. I am currently installing a full car audio build for SQ and i have everything but not the understanding. I tried reading rew how to guide but...

Hello Guy's, I just recently finished my "DIY" Theater Room and overall I am very happy with the result... :)... Admittedly I am very new to all this but doing research, planning, and implementation is what I love to do... Here is my setup...I am looking for ideas to further improve this room...

The most budget audio streamer option is an HDMI streaming stick. The cheapest of them fluctuates around $30. However, there is a problem. All known HDMI sticks upsample everything to 48kHz. Yes, connecting USB DAC to some of them is possible, but it complicates things and increases the price...