moosso
Member
- Joined
- Aug 5, 2021
- Messages
- 47
- Likes
- 65
It's calculated from frequency response and group delay thus I didn't include them, and that formula is quite questionable.rtings.com has scroes of imaging, passive soundstage.
Man you did a great job for providing such uncommon measurements like linearity and leak test. Personnally I think frequency response consistency is as important as frequency response measured on standard rig, the Stealth has almost perfect measured FR but many people doesn't give positive feedback probably due to poor consistency.Crosstalk is cable, source and headphone impedance dependent.
Polarity: Is included in the phase measurement or squarewave I measure it and report when deviating from the standard.
Tyll measured polarity (seen in impulse measurement).
Phase response: GD, excess group delay and phase response are not the same thing but do have a relation.
Crosstalk is more of a QC issue with the stock cable, I'm not sure acoustical crosstalk is a problem just included it in case. Although some headphone introduce crosstalk on purpose like the CROSSZONE CZ series.