As I understand it, the power output via the 6.3mm and xlr outputs is the same. However to reach its max power output it needs to be fed a 4v signal via its TRS inputs. If fed a 2v RCA input its power will be reduced, I'm not sure by how much, but there should still be plenty of power unless you're trying to drive some crazy hard-to-drive cans and if you are you should probably be looking at a higher end amp.Hi. Does the L50 have identical power output if it is used in pure single ended configuration (rca input + single ended output) compared to its (XLR input) setting. I have a Topping E30 and a Magni 3 and I am looking for an amp for more power via (single ended input + single ended output) for my Sennheiser hd 650. I am planning to buy L50 but I am concerned regrading any decrease in power output if it is used in (single ended input + single ended output) with a dac like E30. I don't really want to buy L30 as L50 has more power. So I would like to know what is real power output of L50 in (single ended input + single ended output) at 300 ohm load.
Hope that helps.