wyrainer
Member
- Joined
- Nov 16, 2018
- Messages
- 57
- Likes
- 140
hi, everyone, sorry for my poor English
If you can't understand my word, please see the picture, I think this is very easy
my tone board is vim edition, if yours is generic edition, your case should be less high, because 40 pinheader is not on board
first you should buy more different lenght standoffs
because this case was not designed for tone board, you must cut off one side of khadas diy case, otherwise the rca and usb port can't come out
at last install tone board into this case
If you can't understand my word, please see the picture, I think this is very easy
my tone board is vim edition, if yours is generic edition, your case should be less high, because 40 pinheader is not on board
first you should buy more different lenght standoffs
because this case was not designed for tone board, you must cut off one side of khadas diy case, otherwise the rca and usb port can't come out
at last install tone board into this case