• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

M&K S150 THX

Gammon

New Member
Joined
Jan 15, 2023
Messages
1
Likes
0
Lifelong desire to own these for HT
These are the original series and I also have a room full of other M&K speakers. I am running the 150’s as LCR and the 750 thx as height and rear speakers and 55 tripoles as side surround
4 M&K V1250’s subs in each corner
All bought used in original condition
Powered by Denon x3800H with LCR going through Emotiva A3 BasX amp

I first had the 750’s set as LCR and loved the detail in sound but had a chance to buy the 150’s for $900 as a set and jumped on it
Fuller sound but I seem to be missing the fiber details in movies that I got from the 750’s, at least as I remember

In softer films, it sounds great but in louder, peak explosions etc, I believe they are more muffled than the 750’s but do have a more powerful feel
I understand the 750’s are very close to the 150’s but I’m torn between the two as they are still a bit different

What would be a test I could do simply at home to check the 150’s to see if they have distortion without taking them to the shop?
I ran audyssey from Denon

Last question, I’m in Tacoma area of WA state, can anyone suggest a good repair shop for them in case I want to have them tested?
I use John at NW Audio who was a legend but now at 85 years old, I need to find another audio repair shop as I collect vintage hifi

Thanks for any help as I am a collector for over 40 years but I lack the knowledge I find here to work on my own gear and just have a basic understanding but a good ear

Side note, this is a great forum for info and has helped many people over the years, I’m one so thank you again!

PS, if I can drive my gear up to donate for testing since Amir is in Seattle, I have some interesting pieces to test
 
Looking at purchasing a full M&K setup from my local HT company, and in doing my research, came across this post.
Your setup is almost identical to what I am looking at:
LCR = IW950
Surrounds and rear surrounds = IW150T (triples)
Ceiling = IC95

Powered by Denon 3800h.

Your comment about missing the finer details is a little worrying, did you manage to get your speakers tested?
 
What would be a test I could do simply at home to check the 150’s to see if they have distortion without taking them to the shop?

Please see the measurements done here at ASR by Amir ....


Jim
 
Back
Top Bottom