- Joined
- Jul 29, 2019
- Messages
- 352
- Likes
- 1,156
100% I paid this for myself.
POMONA Yeeees!
Ah... Really? At this price point?
Of course, I peeled off the thing. And now, I can precisely control the inside temperature of steaks. Steaks are umder control, stronger than ever.
Anyway Pomona is good.
One member claimed my loads are wrong before.
At that time I answered like this.
But to make sure, I will add some.
The loads I failed with heat at first place.
Those were heats up considerably fast. when I touch them, I could immediately feel the heating. So relatively easy to find cause of nonlinearity.
And Current updated loads
16 Ohms, Rated as 1kW each.
You can imagine the size and weight.
Finally got coooool and peace in many ways.
So is the new load NP?
I think, YES.
Under
Temp. 28.9 C ( +-1 C) = 84.02 F
Humidity 44 % (+- 5 %)
┌ 34465A ┐
+ - L o a d s - -
└ 0 0 4 0 ┘
*0040 filter was attached with unconnected XLR cable.
Ch1
Ch 2
For 2 Ohms I made them parallel. So you can imagine It's sure for 2 Ohms.
Now, I can provide exact temperature change of load surface. But I'll not. Because, nobody provides benefits to me for adding such a cumbersome, bothering and frustrating process.
Just those who trust in me trust, and those who do not do not.
How to use the data is fully depends on you.
Dummy Load provided by Marchaudio
Under
Temp. 29.0 C ( +-1 C) = 84.20 F
Humidity 44 % (+- 5 %)
┌ 34465A ┐
+ - L o a d - -
*Load was attached with unconnected XLR cable.
In fact I have more loads to test.
(Support from 높이날아라 @ DC inside Speaker gallery)
And I'm working hard on an reasonably-priced AMPs measurement review. Especially about AIYMA A07.
I also have some news about new fried device.
For, RX-A8A please wait. 3rd sample from Yamaha Korea is listed for measurement. (I haven't got paid any at this moment. So I'm still remaining as a 3rd party reviewer)
Last edited: