- Thread Starter
- #21
And finally, what if I reduce the signal generator to -12dBFS and increase the volume knob to about 1 o'clock so that the levels match? Apparently nothing changes as well. So no worries about using up to 12dB of volume reduction in software that the outputs measure the same.
Before with multitone at full scale and volume at 10 o'clock.
After with multitone at -12dBFS and volume at 1 o'clock.
Before with multitone at full scale and volume at 10 o'clock.
After with multitone at -12dBFS and volume at 1 o'clock.