• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

AsciLab speakers are about to launch

ascilab

Active Member
Audio Company
Forum Donor
Joined
May 30, 2024
Messages
102
Likes
791
We are about to launch a new line of speakers designed using Klippel NFS. The initial lineup is as follows:
ascilab.jpg



AsciLab C5B

Specification


- 2-way Bookshelf Speaker
- Dual Passive Radiator
- 1" Alumina Ceramic Dome Tweeter with Custom Waveguide and Phase Plug
- 5" Alumina Ceramic Woofer
- LW 4th Order Crossover
- 1.1kHz Crossover Point
- Size : WxHxD / 176x362x230mm(except binding post)
Expected price: $1000 for pair
measurement data

c5b.jpg

c5b.jpg



AsciLab C6B

- 2-way Bookshelf Speaker
- Dual Passive Radiator
- 1" Alumina Ceramic Dome Tweeter with Custom Waveguide and Phase Plug
- 6" Alumina Ceramic Woofer
- LW 4th Order Crossover
- 1.1kHz Crossover Point
- Size : WxHxD / 197x385x265mm(except binding post)
Expected price: $1100 for pair
measurement data
c6b.jpg

c6b.jpg




AsciLab A6B Passive

Specification


- 2-way Bookshelf Speaker
- Dual Purifi Passive Radiator
- 1" Alumina Ceramic Dome Tweeter with Custom Waveguide and Phase Plug
- 6" Aluminum Purifi Woofer
- LW 4th Order Crossover
- 1kHz Crossover Point
- Bass Extension : F3 35Hz / F6 31Hz / F10 28Hz
- Size : WxHxD / 220x400x260mm(except binding post)

Expected price: $2900 for pair
measurement data
a6b.jpg

a6b.jpg


AsciLab A6B Active

Specification


- 2-way Bookshelf Speaker
- Dual Purifi Passive Radiator
- 1" Alumina Ceramic Dome Tweeter with Custom Waveguide and Phase Plug
- 6" Aluminum Purifi Woofer
- 2 x 250W
- 1kHz Crossover Point
- Bass Extension : F3 **Hz / F6 **Hz / F10 **Hz
- Size : WxHxD / 220x400x260mm(except binding post)



Detailed measurement results will be added through posts.

The website for worldwide sales is scheduled to open between August and September 2024.

Last edited: 7-14-2024
 
Last edited:
AsciLab_C6B_v1_2024-May-30_10-26-43AM-000_CustomizedView6858847910.png

AsciLab_C6B_v1_2024-May-30_10-28-08AM-000_CustomizedView13178470236.png

AsciLab_C6B_v1_2024-May-30_10-39-43AM-000_CustomizedView6781324340.png


AsciLab C6B

Specification


- 2-way Bookshelf Speaker
- Dual Passive Radiator
- 1" Alumina Ceramic Dome Tweeter with Custom Waveguide and Phase Plug
- 6" Alumina Ceramic Woofer
- LW 4th Order Crossover
- 1.1kHz Crossover Point
- Size : WxHxD / 197x385x265mm(except binding post)

Measurements

CEA2034.png
Early Reflections.png
Estimated In-Room Response.png
Frequency Response and Phase.png


Contour Plot - Horizontal.png
Contour Plot - Vertical.png
Beamwidth - Horizontal.png
Beamwidth - Vertical.png
SPL Horizontal.png
SPL Vertical.png

Fundamental + Harmonic distortion components 85dB SPL @1M.png
Harmonic distortion (relative) 85dB SPL @1M.png
Fundamental + Harmonic distortion components 95dB SPL @1M.png
Harmonic distortion (relative) 95dB SPL @1M.png
MD relative to Fundamental.png
Compression test.png


c6b.gif

c6b_v.gif
 

Attachments

  • Harmonic distortion (relative) 85dB SPL @1M.png
    Harmonic distortion (relative) 85dB SPL @1M.png
    145.7 KB · Views: 62
  • Harmonic distortion (relative) 95dB SPL @1M.png
    Harmonic distortion (relative) 95dB SPL @1M.png
    144.2 KB · Views: 71
  • MD relative to Fundamental.png
    MD relative to Fundamental.png
    155.2 KB · Views: 62
Last edited:
predicted in room response is a perfect match to my preference, flat above 1kHz and a wide shelf below, they also look nice. For a passive speaker the response is pretty perfect
 
Last edited:
Measurements look super, I wish you every success.
Do you have a website, had a quick look couldn’t immediately see anything?
Keith
 
Impressive! The estimated in room response and the contour plot indicate a little brightness but this should be easily fixed by EQ if necessary at all. Very curious how the Purify equipped speakers measure in comparison.
 
Looks very promising including the measurements for the small speaker on https://audiolabinsight.com/t/ascilab/143/20

How long will it take you to share your NFS measurements and when will the purify equipped speakers be available?
Purifi Aluminum woofer version is developing now. After all the measurement and tuning is done, I’ll share them too.

Thanks!
 
predicted in room response is a perfect match to my preferences, flat above 1kHz and a wide shelf below, they also look nice. For a passive speaker the response is pretty perfect
That was our goal. Flat DI. It can be extended to lower frequency by additional drivers and kind of cardioid pattern.

Thanks to you to see that details.
 
Impressive! The estimated in room response and the contour plot indicate a little brightness but this should be easily fixed by EQ if necessary at all. Very curious how the Purify equipped speakers measure in comparison.
Exactly! due to smooth and continuous directivity the tonal balance can be adjusted easily. Use EQ or toe in and out.
 
Impressive! The estimated in room response and the contour plot indicate a little brightness but this should be easily fixed by EQ if necessary at all. Very curious how the Purify equipped speakers measure in comparison.
Directivity shape must be similar but the other factors like harmonic distortion, compression, frequency range will be pretty enhanced.
 
@ascilab, looking good.

I gather this company name and speakers will be making a launch. Or is the brand already established in Korea?
There are more pictures and details of construction etc. in this thread;

826b40f16154635192c52a6e6e60d759159aa5bb_2_666x500.jpeg


@Nuyes, I gather you've been involved? I see you're in these threads. ;)


JSmith
 
@ascilab, looking good.

I gather this company name and speakers will be making a launch. Or is the brand already established in Korea?
There are more pictures and details of construction etc. in this thread;

826b40f16154635192c52a6e6e60d759159aa5bb_2_666x500.jpeg


@Nuyes, I gather you've been involved? I see you're in these threads. ;)


JSmith
Yes. We are established in South Korea.
Also, Nuyes is a reviewer of that website.
That pictures are prototypes before changing PR.
 
At 40° is about what I would like.
Really nice overall and comparing them with similar builds price is really nice too.

I'll double for @Nuyes,we want one these super detailed threads!

Edit:I absolutely love the driver-baffle integration,no visible screws and stuff,looks like some serious thinking about the design.
 
@ascilab, looking good.

I gather this company name and speakers will be making a launch. Or is the brand already established in Korea?
There are more pictures and details of construction etc. in this thread;

826b40f16154635192c52a6e6e60d759159aa5bb_2_666x500.jpeg


@Nuyes, I gather you've been involved? I see you're in these threads. ;)


JSmith
Hi, I’ve been a member of this website.
Due to personal reasons (studying acoustics), I took a break from being active in the ASR community for a while.

Thank you for remembering me. :)
 
Back
Top Bottom