• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required as is 20 years of participation in forums (not all true). Come here to have fun, be ready to be teased and not take online life too seriously. We now measure and review equipment for free! Click here for details.

About the sound of class D amplifiers

Joined
Mar 18, 2020
Messages
63
Likes
7
Location
China-HeNan
#1
I have an 《ik iloud》 speaker. The sound of this speaker is very accurate. It is DSP crossover + Class D amplification. I want to know that all D types have this sound characteristic? Precision, neutrality, leading edge and trailing edge are all great.
If a Class D amplifier drives HIFI passive speakers, does it still have neutral, clean, and transient sound characteristics? ? ?
Currently my speaker is HIEND-ELAC CONCENTRO.
I desperately need a power amplifier that is neutral, accurate, very good in transient, and 4Ω greater than 800W, and low distortion. However, NC1200, 4Ω700W is already 1% THD with high distortion, which is obviously inappropriate, and the power after AHB2 bridge is also not enough.
Please recommend it
 

LTig

Major Contributor
Forum Donor
Joined
Feb 27, 2019
Messages
2,182
Likes
3,228
Location
Europe
#2
Peak Power is 600W, why do you want to feed it more than 800W?
 

Matias

Major Contributor
Forum Donor
Joined
Jan 1, 2019
Messages
1,235
Likes
1,601
Location
São Paulo, Brazil
#3
I think this is the 3rd thread asking about amplifiers for your speakers. :)
Vera Audio bridged Purifi 1000W at 4 ohms.
 
OP
AnLaoJin
Joined
Mar 18, 2020
Messages
63
Likes
7
Location
China-HeNan
Thread Starter #5
Peak Power is 600W, why do you want to feed it more than 800W?
Only the amplifier with stable power of 800W and above, the distortion can be as low as possible at 600W
 

CDMC

Addicted to Fun and Learning
Forum Donor
Joined
Sep 4, 2019
Messages
944
Likes
1,599
#8
I think this is the 3rd thread asking about amplifiers for your speakers. :)
Vera Audio bridged Purifi 1000W at 4 ohms.
I was about to say the same thing. To the OP, as I said in the other thread, it sounds like you have an amp in mind and not really interested in what we have to say, just playing games until you get the answer you want. Go buy the amp you have decided on and enjoy it. You have to listen to your system, not us.
 

waynel

Senior Member
Forum Donor
Joined
Nov 14, 2019
Messages
480
Likes
439
#9
I have an 《ik iloud》 speaker. The sound of this speaker is very accurate. It is DSP crossover + Class D amplification. I want to know that all D types have this sound characteristic? Precision, neutrality, leading edge and trailing edge are all great.
If a Class D amplifier drives HIFI passive speakers, does it still have neutral, clean, and transient sound characteristics? ? ?
Currently my speaker is HIEND-ELAC CONCENTRO.
I desperately need a power amplifier that is neutral, accurate, very good in transient, and 4Ω greater than 800W, and low distortion. However, NC1200, 4Ω700W is already 1% THD with high distortion, which is obviously inappropriate, and the power after AHB2 bridge is also not enough.
Please recommend it
Unsubscribe
 
Top Bottom