Ongii
Member
- Joined
- Nov 1, 2020
- Messages
- 66
- Likes
- 10
Hello!
My Marantz cinema 50 has limited equalization possibilities, on the headphones output.
On the autoeq website, I saw that even with headphones which are already well balanced like Sennheiser HD650, there are worlds between the final results of equalizing with such a simple system like an AVR and with a PC with EAPO.
As I have multiple sources, I'd like to equalize down the chain, so after the AVR which acts as source selector.
Now I ask myself if these difference in the curves will be actually hearable.
If so, then I see no alternative to getting two (!) more devices: first a miniDSP 2x4 to do the PEQ on the Zone2 output of the AVR, and second an headphones amp with analogue input (BTW, this would imply an additional ADDA cycle...).
Alternative, but I suspect it will not work: AVR to Qudelix, via Bluetooth.
Thanks for your thoughts and considerations !
My Marantz cinema 50 has limited equalization possibilities, on the headphones output.
On the autoeq website, I saw that even with headphones which are already well balanced like Sennheiser HD650, there are worlds between the final results of equalizing with such a simple system like an AVR and with a PC with EAPO.
As I have multiple sources, I'd like to equalize down the chain, so after the AVR which acts as source selector.
Now I ask myself if these difference in the curves will be actually hearable.
If so, then I see no alternative to getting two (!) more devices: first a miniDSP 2x4 to do the PEQ on the Zone2 output of the AVR, and second an headphones amp with analogue input (BTW, this would imply an additional ADDA cycle...).
Alternative, but I suspect it will not work: AVR to Qudelix, via Bluetooth.
Thanks for your thoughts and considerations !
Last edited: