professional dts cad 5 installed up and running .
tested with laserdisc , apollo 13 dts THX , lucasfilm ltd THX sound system .
got the dts cad 5 some 9 years ago and only tested . been on the install list for 9 years . i got cats to look after and feed .
had to make short custom 8channel XLR to solderless DB25 phoenix connector that mates with Dolby CP750 above as the dts cad doesn't have fader same as Dolby DA20 or most cinema dts decoders and the Dolby CP is used for fader control though one of the AUX or multi channel external inputs . no EQ as all EQ is done at the Dolby CP or SDDS or other .
there is bundle of features on this , cad 5 .
set the analog drive level from +4dB to -10dB for input to the CP750 .
output levels all set to 00dB
set the meter ballistics to ( no peak ) for fast meter response
only con is power switch is on back panel and hard to reach .
pros . i wouldn't trade it for any four XXXX . far too rare dts processor this .
pros lightweight easy install
solo monitor when once pressed mutes other channels so i can then use the soft-keys to switch through L C R Ls Rs Lbs Rbs LFE.1 via speakers or headphones
nice large dts logo
dts on this professional cad 5 , aggressive !