OP
- Thread Starter
- #441
Yeah, except in my case the sub was about 15db too quiet. Perhaps similar issues either way with the calibration software not anticipating this?Audyssey had similar problems with integrating my 4 subs my 2 JBL 308ps. I was excited to test Audyssey, as I've only ever used YPAO(terrible) and Dirac(great). After finally running through all the measurements and designing my custom curve, I was excited to fire up some music and hear the results. My immediate reaction to what I heard was "HOLY S@$T! That's way too much bass". After measuring with REW, I ended up having to turn the subs down 12dB from where Audyssey set them. I wish I had saved the original REW measurements. Below is one of the -12 measurements I saved, and even that is probably still too much bass for most folks(I'm a bit of a bass head).
View attachment 78933
Imagine that, but with everything 100Hz and below boosted by 12dB.
I've just moved the sub to what seems like the best location for this room, and it sounds much louder subjectively as calibration is running. Will report back soon on if this fixes the -15db issue.