• WANTED: Happy members who like to discuss audio and other topics related to our interest. Desire to learn and share knowledge of science required. There are many reviews of audio hardware and expert members to help answer your questions. Click here to have your audio equipment measured for free!

What cables do you use in your systems?

Katji

Major Contributor
Joined
Sep 26, 2017
Messages
2,989
Likes
2,273
Really?
Maybe we should have a proper survey, including location and so on so we can analyse it.
 

Julf

Major Contributor
Forum Donor
Joined
Mar 1, 2016
Messages
3,044
Likes
4,053
Location
Amsterdam, The Netherlands
Why is this better than a star quad?

And what is the point of even star quad on a speaker wire (that is not susceptible to induced noise)?
 

watchnerd

Grand Contributor
Joined
Dec 8, 2016
Messages
12,449
Likes
10,415
Location
Seattle Area, USA
And what is the point of even star quad on a speaker wire (that is not susceptible to induced noise)?

In a home environment over normal lengths?

Probably no point.

I happen to use a Canare star quad speaker cable, it's cheap, but not needed, really.
 

Speedskater

Major Contributor
Joined
Mar 5, 2016
Messages
1,654
Likes
1,376
Location
Cleveland, Ohio USA
And what is the point of even star quad on a speaker wire (that is not susceptible to induced noise)?
Speaker cables can act as interference antennas (it just doesn't happen very often).
Audio Engineering Society Fellow Jim Brown wrote:
The most fundamental cause of radio interference to other systems is the fact that the wiring for those systems, both inside and outside the box, are antennas. We may call them"patch cables" or "speaker cables" or "video cables" or "Ethernet cables," or printed circuit traces,but Mother Nature knows that they are antennas! And Mother Nature always wins the argument.
* * * * * * * * * *
and a StarQuad speaker cable will have less total inductance which may help high frequency response. (again, it doesn't happen very often)
 

Angsty

Major Contributor
Forum Donor
Joined
Apr 11, 2020
Messages
1,917
Likes
2,279
Location
North Carolina, U.S.
C81C363A-66D8-46AB-B7F9-77B2081BE830.gif
 

Sal1950

Grand Contributor
The Chicago Crusher
Forum Donor
Joined
Mar 1, 2016
Messages
14,242
Likes
17,028
Location
Central Fl
Starquad does offer the added dedundancy of the dual leads for each line. A good factor when used in "under the rug" type runs. (maybe, maybe not)?
I still prefer just plain ole zip cord, nice and heavy with long term reliable insulation.
 

Julf

Major Contributor
Forum Donor
Joined
Mar 1, 2016
Messages
3,044
Likes
4,053
Location
Amsterdam, The Netherlands
Speaker cables can act as interference antennas (it just doesn't happen very often).
Audio Engineering Society Fellow Jim Brown wrote:
The most fundamental cause of radio interference to other systems is the fact that the wiring for those systems, both inside and outside the box, are antennas. We may call them"patch cables" or "speaker cables" or "video cables" or "Ethernet cables," or printed circuit traces,but Mother Nature knows that they are antennas! And Mother Nature always wins the argument.
* * * * * * * * * *
and a StarQuad speaker cable will have less total inductance which may help high frequency response. (again, it doesn't happen very often)

Neither are really an issue at the impedance and signal levels of a speaker connection (OK, there are special exceptions like the MIT cables that actually contain filter components that modify frequency response).
 

mansr

Major Contributor
Joined
Oct 5, 2018
Messages
4,685
Likes
10,705
Location
Hampshire
Neither are really an issue at the impedance and signal levels of a speaker connection (OK, there are special exceptions like the MIT cables that actually contain filter components that modify frequency response).
It's not a filter, it's an "articulation console." :facepalm:
 

Speedskater

Major Contributor
Joined
Mar 5, 2016
Messages
1,654
Likes
1,376
Location
Cleveland, Ohio USA
Neither are really an issue at the impedance and signal levels of a speaker connection (OK, there are special exceptions like the MIT cables that actually contain filter components that modify frequency response).
I think that we have covered this topic before.
That is incorrect. The interference can travel thru the feedback loop to the input stage. In the distant past, hi-fi's often picked up taxi cab and police radio transmissions. While the sources of interference are different now they have not disappeared.
 

watchnerd

Grand Contributor
Joined
Dec 8, 2016
Messages
12,449
Likes
10,415
Location
Seattle Area, USA
I think that we have covered this topic before.
That is incorrect. The interference can travel thru the feedback loop to the input stage. In the distant past, hi-fi's often picked up taxi cab and police radio transmissions. While the sources of interference are different now they have not disappeared.

4-5 GHz radio signals common in digital not in audio band, though.
 
Top Bottom