watchnerd

How do I tap the preamp circuit before EQ is applied for an integrated amp?

What about if I just want to measure the input capacitance of the MM in out of the integrated amp?

approach the problem in a roundabout way... you observe the response fr above 5khz of a cartridge and compare it with other measurements...

Exactly how it sounds - there a magnetic alloy attached to the cantilever that moves within a fixed magnetic field.

No. If there is visual dust I give the record a tap water rinse first. But the main wash solution gets cloudy after 4-5 records so I...

With uncontrolled testing more money sounds better was all I got from it, which we already knew. If needle drops of each were provided...

I'm trying to unpack what this means for cartridge body, LCR loading, and engine type. And failing.

I was referring to the ultrasonic cleaner. i.e. do you see hair and dust floating in the water after cleaning?

How is the device, visually, for removing dust and hair?

So here is an update regarding a question about cleaning new vinyl. This is only one record and one side analysed for spectrum and...

Why the anger? When the stupid rich buy silly expensive cartridges, they are also subsidising your/our low end stuff.

It does 2 key things, the first is that it replasticises old vinyl - for the vinyl to have a decently long life it (as a form of...

Yes, I use it (dry) with my MC, put the device on the platter, lower the cart onto it. I use it when it sounds like there is something...

Yes, I would turn it on, then put it on turntable platter and lower the arm and stylus onto it using the "cueing arm?" - the little...

You did this while the stylus was attached to the motor? i.e. you didn't remove it?