win

You tune the combination of your subs for best performance with MSO, using DSP for each individual sub. They all receive and play the...

I have one of these and wasn't using it and then recently I added 2 subs with a very long balanced to unbalanced cable with the subs...

Thanks. I unfortunately have some ground hum on my long xlr->rca subwoofer connection.

From the test. "There is a small insertion loss, causing 0.1 volt minimal reduction in output voltage at the impedance used for testing...

Does anyone know if this device would lower signal levels?

I think this story is totally plausible, but measuring subwoofers by seat of the pants feel in different areas really doesn't tell you a...

If you want to summon somebody from rme, just say that you're having a problem with one of their products for which your issue is in the...

I'll check it out. The box the meters came in was from a brand called Coleman. I didn't like those meters as much, so I put in the...

I finally got around to cataloging my system. note: Stuff like this is so much easier and funner with ai than it would have been even 6...

Was gonna say the same. I use my MSO-tuned 2.4 system every day and still can't believe how smooth the bass is. I also use Dirac (via...

Wow I botched multiple parts of my reply Forgive me asr

You should be all set, just make sure they don't say 'aes ebu', those are for digital connections.

You're right

I suppose one thing to look out for is the 'aes' xlr cable is truly different to the analog xlr cable. Connector will still fit but...

Maybe I'm missing a nuance to your question, but of course they're compatible. The XLR analog is a proprietary four-conductor connector...