Just got M4 with firmware 2.00.
REW is 5.20.
I was calibrating the soundcard(M4) using REW.
You can see in the picture:
Output/1: Out 1 is M4's monitor out 1;
Input/3: In 3 is M4's line in 3;
I am confused with Out/In meter.
Is Out meter for Output and In meter for Input?
Because, if MOTU main(monitor) knob is at min position, In meter will have no color bar. If MOTU main knob is at max position, In metter will have a color bar top at around -23.8.
Out meter stays at -20.0 all the time.
It looks like In meter is for Output (M4's monitor out) since it's controlled by main knob!!! And Out meter is for input.
REW is 5.20.
I was calibrating the soundcard(M4) using REW.
You can see in the picture:
Output/1: Out 1 is M4's monitor out 1;
Input/3: In 3 is M4's line in 3;
I am confused with Out/In meter.
Is Out meter for Output and In meter for Input?
Because, if MOTU main(monitor) knob is at min position, In meter will have no color bar. If MOTU main knob is at max position, In metter will have a color bar top at around -23.8.
Out meter stays at -20.0 all the time.
It looks like In meter is for Output (M4's monitor out) since it's controlled by main knob!!! And Out meter is for input.