He did, you quoted it.Tell that to your other forum members that were rude and angry.
He did, you quoted it.Tell that to your other forum members that were rude and angry.
It's his website, his forums.Your must be an unhappy person too.
Just in posting this you made a personal comment toward me as if I made a personal.comment without provocation. You must be an unhappy person too. Have fun being unhappy with your you unhappy pretend scientists.
We are not scientists. We follow what science says. And we do it cordially. If that is not for you, then by all means don't post anymore.You must be an unhappy person too. Have fun being unhappy with your you unhappy pretend scientists.
Didn't you read about the serious ABX organized with many people, where a 29$ Fiio couldn't be spotted from a 3.000$ DAC?
It was not a dCS Debussy but the organizer of the contest rent one at some point but couldn't find it anything special.
https://www.diyaudio.com/forums/dig...blind-test-audible-difference-whatsoever.html
dCS should give the composers a break, also!
As shown in the multitone measurement, the distortion doesn't rise at higher frequency. It should be an varying ultrasonic noise that caused it. You can go to d50s thread for little more detail.Measurements are amazing, but i see the distortion in high frequencies are not being mentioned even once, why that? And, i would like to see how it extend that 'distortion' on 20 to 50khz too, or more.. I mean, you can see that, It's the only minor thing that something like smsl d1 doesn't have..
The curve usually tracks the same above 20 kHz that is below:Measurements are amazing, but i see the distortion in high frequencies are not being mentioned even once, why that? And, i would like to see how it extend that 'distortion' on 20 to 50khz too, or more.. I mean, you can see that, It's the only minor thing that something like smsl d1 doesn't have..
You're saying i can't hear the distortion of the treble? Sorry if i didn't speak well, but in the graph it rises and rises...The curve usually tracks the same above 20 kHz that is below:
Since you can't hear the main tone above 20 kHz, you certainly can't hear distortion products many dBs lower.
In which frequencies you mean it doesn't rise? <20khz? Because thd+n vs frequency i see that it rises past 2khz, what multitone do to it then? I do not know what is the multitone test, but i see there Is treble 'distortion' on the thd graph.. Not even mentioned once, so maybe i'm simply wrong (But i should have already been silences about), or more simply there is very little to worry about that, but I'm worried..As shown in the multitone measurement, the distortion doesn't rise at higher frequency. It should be an varying ultrasonic noise that caused it. You can go to d50s thread for little more detail.
In which frequencies you mean it doesn't rise? <20khz? Because thd+n vs frequency i see that it rises past 2khz, what multitone do to it then? I do not know what is the multitone test, but i see there Is treble 'distortion' on the thd graph.. Not even mentioned once, so maybe i'm simply wrong (But i should have already been silences about), or more simply there is very little to worry about that, but I'm worried..
Edit: Hey! Why i see this on their measurements?? It does not have that treble distortion, why? (Photo)
Probably different cause from d50s.In which frequencies you mean it doesn't rise? <20khz? Because thd+n vs frequency i see that it rises past 2khz, what multitone do to it then? I do not know what is the multitone test, but i see there Is treble 'distortion' on the thd graph.. Not even mentioned once, so maybe i'm simply wrong (But i should have already been silences about), or more simply there is very little to worry about that, but I'm worried..
Edit: Hey! Why i see this on their measurements?? It does not have that treble distortion, why? (Photo)
Discrete amplifier circuits.Does anyone know why this DAC gets so hot? Someone on head-fi mentioned it heats up to 50 degrees Celsius. Surprising since it has vents on either side. Could this temp be problem over time?
Possibly in terms of bass roll off on dx3pro. But still questionable.Any A/B blind tests of this unit and DX3Pro? Anything audible at all?
Possibly in terms of bass roll off on dx3pro. But still questionable.
It means it accepts dsd over optical but only up to dsd64. for other dsd rates you need USB.It Also says Dsd64 (DOP mode) via optical: What does it means? It upsample the pcm to dsd64??
Does anyone know why this DAC gets so hot? Someone on head-fi mentioned it heats up to 50 degrees Celsius. Surprising since it has vents on either side. Could this temp be problem over time?