@DJBonoBobo @custom
@GuyLayfield
So I had some time, downloaded and inverted the MA1 calib file.
Original MA1 Download (first entries)
"Frequency in Hz" "Sensitivity in dB relative to 37.2 mV/Pa"
9.84 -1.58
10.13 -1.62
10.43 -1.67
...
Inverted MA1 Calib File
"Frequency in Hz" "Sensitivity in dB relative to 37.2 mV/Pa"
9.84 1.58
10.13 1.62
10.43 1.67
...
Question: What about that first line? For example my UMIK1 Calibfile contains info about "sens factor" and "again" etc. but the MA1 doesnt. What does that do in REW and is the MA1 calib file working properly without that info?
"Sens Factor =0.358dB, AGain =18dB, SERNO: xxxx"
"Auto-generated 90-degree calibration file"
10.054 -3.8331
10.179 -3.6763
10.306 -3.5227
...
Thx. Appreciate it.