Before any EQ it sounded interesting. Let's just go with that. Speakers were calling attention to themselves and there was not a distinct center image. Sub was also messing up quite a bit.
After just EQ and distance time alignment, there was a better center image, but the sub was calling attention to itself. I had 0ms delay for left speaker and sub and 0.55ms for right speaker. Like I said, everything summed semi-well in moving mic measurments in REW RTA screen, but something was off.
Opened SMAART and measured each speaker and set phase based on that to get 0ms for sub, 4.0ms for left speaker, and 4.55ms for right speaker. Now everything just disappears. You only know a sub is playin when I turn it off and realize you are missing the low end. I also saw a couple spots where I could use all pass filters. I didn't in this case due to time, but may go back and fix that area if I get more time. They are not in frequencies that are a huge deal and it is a narrow area.
Before any EQ:
View attachment 144842
After EQ: Took about 3 filters on subwoofer with crossover and about 10 filters on each speaker with crossover.
View attachment 144843