aravena562
Member
- Joined
- Apr 25, 2022
- Messages
- 17
- Likes
- 65
Let me tell you the mistake I made. buy a nad c298 amplifier, which comes with purifi modules. I used it for half an hour and it worked perfectly. then plug it into an amp selector next to other amps I have based on coolgan for comparison. It was the worst mistake I could have made. my selector had a common ground, and I didn't read the manual for the nad c298 and didn't know that it couldn't be connected to a common ground selector. In summary, a tremendous blow and the nad amplifier stopped working, now when I turn it on the LED blinks red and of course it does not make any sound. Of course the problem is absolutely my fault and not anyone's fault, I connected it in a way that I shouldn't have. what should have gone wrong? I live in Chile, I sent it to the technical service but they are waiting for the diagnostic interface to arrive from nad for that amplifier.... I have been waiting for this interface for a month. Excuse the bad English, since my native language is Spanish.