OP
- Thread Starter
- #1,761
You can certainly use more connectors on such a cable, provided the wiring is right. I believe @tomchr has said it is not plug and play (pin to pin). You'll have to confirm pinouts with him, or others who have his board.So, power connections are now in place in my amp.
Only remaining part is the connection from SMPS J4 to Neurochrome buffers J2. From one connection to two connections. Need to build new ribboncable, is it possible to have three connectors on one ribboncable or are the leads cut in the connector?
Similar to pic but with three connectors.
View attachment 94361