Sokel
Master Contributor
- Joined
- Sep 8, 2021
- Messages
- 6,237
- Likes
- 6,364
Her you go.Your highest harmonics
View attachment 229923
look a lot like my left channel spikes (Caused by the improper traces and component locations on the PCB):
My right channel is a lot cleaner there.
You said earlier that you tried with the right input channel of the E-MU too, but are you sure that you have two identical channels?
Please try Khadas (Right) -> E-MU (Right) again if you have time...
Spikes are Khadas's,left channel of EMU is completely clean of spikes on it's own.
R channel on the other hand has noise.