randomusername
Member
- Joined
- Jan 8, 2021
- Messages
- 34
- Likes
- 32
Sorry if I post in wrong forum, it is basically general EQ question, but specific to headphones in my case.
First try i attempted to EQ headphones was by looking at their measurements curve and writing peaks and dips corrections filters manually, trying to align resulting curve to expected target with bass shelf (just like amrim does now in his headphone reviews). After few iterations, the result i got was pretty good, sound become more balanced, less muddled and "full" comared to stock headphone sound, you know what i am talking about.
Next try i decided to use REW for this purporse. I dont have any speakers and only heard about REW before in this forum, so it take me some time to figure out how to use this software. I loaded 2018 harman target as home curve (got it from autoeq github repository), set speaker type to full-range whitout slopes, loaded crinacle GRAS measurements for my headphone (he seems to do many of them and calculated average curves already), selected range 20-16500 (i dont hear beyond 16500 anyway) and let REW to calculate filters. Also i have added low-pass filter at 18.5k to cut off exceeded freqencies (last auto-generated peak resulted to high rise at this point, and REW seems to not care about this).
The results was astonishing, after loading 20 generated filters in equalizerapo all muddiness and harshness i have seems to be used to and i have not noticied is gone, and sound become extremelly clear and natural. So, after few days i have spent to listening to music in this beautiful quality, i want to know, if there is any more convient way / software to design EQ curve rather than REW calculations to predefined target? I want to change target curve manually just by dragging it by mouse (and listen to results) and I dont even need this autogenerated 20 PEQ filters in text form, my equalizer supports convolution filters in .wav files, and results should be more precise in this way.
Thank you in advance
First try i attempted to EQ headphones was by looking at their measurements curve and writing peaks and dips corrections filters manually, trying to align resulting curve to expected target with bass shelf (just like amrim does now in his headphone reviews). After few iterations, the result i got was pretty good, sound become more balanced, less muddled and "full" comared to stock headphone sound, you know what i am talking about.
Next try i decided to use REW for this purporse. I dont have any speakers and only heard about REW before in this forum, so it take me some time to figure out how to use this software. I loaded 2018 harman target as home curve (got it from autoeq github repository), set speaker type to full-range whitout slopes, loaded crinacle GRAS measurements for my headphone (he seems to do many of them and calculated average curves already), selected range 20-16500 (i dont hear beyond 16500 anyway) and let REW to calculate filters. Also i have added low-pass filter at 18.5k to cut off exceeded freqencies (last auto-generated peak resulted to high rise at this point, and REW seems to not care about this).
The results was astonishing, after loading 20 generated filters in equalizerapo all muddiness and harshness i have seems to be used to and i have not noticied is gone, and sound become extremelly clear and natural. So, after few days i have spent to listening to music in this beautiful quality, i want to know, if there is any more convient way / software to design EQ curve rather than REW calculations to predefined target? I want to change target curve manually just by dragging it by mouse (and listen to results) and I dont even need this autogenerated 20 PEQ filters in text form, my equalizer supports convolution filters in .wav files, and results should be more precise in this way.
Thank you in advance