junki
Member
- Joined
- Mar 24, 2018
- Messages
- 55
- Likes
- 43
Hi,
After coming across this community for a few days now and appreciating the measurements, I noticed that rarely is a full set of measurements made (or at least shared) before conclusions, and more times than not only a subset of measurements are made.
If possible, I'd like to request some standardization of official "review and measurement of <device>". In particular, the following suggestions:
For official reviews of devices, include the following set for USB (if applicable) and S/PDIF separately:
This will let us 1) get a full picture of each device and 2) more easily make apples to apples comparisons.
After coming across this community for a few days now and appreciating the measurements, I noticed that rarely is a full set of measurements made (or at least shared) before conclusions, and more times than not only a subset of measurements are made.
If possible, I'd like to request some standardization of official "review and measurement of <device>". In particular, the following suggestions:
For official reviews of devices, include the following set for USB (if applicable) and S/PDIF separately:
- Frequency response & channel matching
- Jitter and noise
- Amplitude-domain linearity at 16-bits & 24-bits
- Time-domain linearity at 16-bits & 24-bits
- Frequency domain THD+N with THD% and THD+N% displayed
- IMD
- HD and Noise of 1Khz tone at 0 dB
This will let us 1) get a full picture of each device and 2) more easily make apples to apples comparisons.