Robciak

Seems like I didn't. This is a quick comparison with and without the preamp. It’s a much flatter response. I'll repeat the measurement...

Thanks for all comments. I will do all of this and report changes. It terms of cartidge, I used AT-XP3, it's a default model for this...

Unitra provides a test report from an AP analyzer for each amplifier. I’m not sure if this also covers their turntables, but it’s very...

Thanks for advise. I will try to do it together with other adjustment and test the turntable again.

They are. I had a chance to visit their R&D and see that they care about products. Hope you will find the time to do some measurements!

I was able to tweak measured crosstalk on my LP120 by adjusting cartridge azimuth by loosening the headshell, rotating slightly (there's...

Thanks - very insightful. I bought the two record set from UNITRA, right when it came out. These guys are fantastic. Haven't had a...

Hi, I’d like to share my latest turntable measurement procedure that I’ve been working on. It’s still under development, so I’ll focus...